Magnetic Brake

What are the functional characteristics of the magnetic powder brake?

  (1) High-precision torque control of magnetic powder brake The torque control range is very wide, and the control precision is high. The torque and excitation current are transmitted to the correct ratio, and high-precision control can be realized.
  (2) Superior durability and long life of magnetic powder brakes Super-alloy magnetic powder with high heat resistance, wear resistance, oxidation resistance and corrosion resistance has a long service life.
  (3) Suitable for high-frequency operation Respond to agile and fast and special heat dissipation structure, suitable for high-frequency operation.
  (4) Continuous sliding operation The cooling structure is excellent, and the cooling structure is uniform. The high heat resistance of the magnetic powder allows the connection and braking power and sliding power to be large, and it can smoothly slide and prevent vibration. (5) The connection is smooth and has no impact. The impact at the time of connection is extremely small, and it can be smoothly started and stopped without impact. Moreover, the resistance torque is extremely small and does not cause useless heat.
(6) Constant torque characteristics of the magnetic group The magnetic characteristics of the magnetic powder are good, and the bonding force between the powder particles is stable, the sliding torque is very stable, and the constant rotation torque is not related to the relative number of revolutions.
     (7) Lightweight, maintenance-free, long life, simple and lightweight type, high temperature resistant coil and special grease bearing, and wear-resistant special treatment for the armature that is easy to wear, prolong the service life of the magnetic powder brake.

Magnetic powder brake safety system:
The electronic control system of the magnetic powder brake: each control switch of the magnetic powder brake, the button is sensitive and reliable, the lines are arranged neatly, the terminal symbol symbol is clear; the main switch has a label box and the wire is wired;
The insulation resistance of the magnetic powder brake is ≥ 2MΩ;
The protective device of the magnetic powder brake: the exposed rotating part of the magnetic powder brake has a safety shield and has a clear direction mark;
Grounding device for magnetic powder brakes: Magnetic powder brakes should have reliable grounding bolts and an obvious safety grounding mark.

PRE-B Single Shaft Magnetic Powder Brake

PRE-B1 Hollow Shaft Shell Rotating Magnetic Powder Brake

PRE-B2 Hollow Shaft Inner Shell Rotating Magnetic Powder Brake

The magnetic powder brake transmits torque according to the magnetic salt spray test box magnetic physics and the polypropylene polypropylene reinforced fiber anti-corrosion tape. The crisper has the characteristics that the excitation current and the transfer torque of the seedling substrate are substantially linearly entangled. It can transmit a certain torque regardless of the slip, and has the advantages of fast response, simple structure, no pollution, no music, no impact vibration, and energy. It is a kind of active and wild component of energy-saving fryer with multi-purpose and utility magnetic brake. It has been wildly released by the unwinding and winding polypropylene tubes that are dominated by paper, printing, plastics, rubber, textiles, printing and dyeing, wire and cable, metallurgy, tablet presses and other related coil processing industries.

Magnetic powder brakes and polypropylene tubes are often used for dynamometers, hoists, landing gears, and brakes. Magnetic powder brakes and magnetic powder gatherers are often held at the end. Please keep your moisture steady. If the magnetic powder is affected by the cabinet of the potentiometer, the utility of the landing gear will become unsettled, so it is extremely important to learn from the oil or the water. When a 7.com is placed in a gearbox, the oil will penetrate the inside through the shaft, so that the network cabinet is completely sealed with a film. Please stabilize the outside temperature. Expanded by intermittent operation, the minimum outside temperature of the refining camp is expanded to 90 degrees below the operating time. When the value of the landing column is exceeded, the durability will be greatly reduced. Be sure to use the frontier temperature as mentioned above as a standard. Be sure to keep the slope protection within the promised slip-opening rate when holding.

Please hold the magnetic powder collector with a regular arrangement of the wire mesh skeleton composite pipe method (see the high-speed tamper side as the output side). Assuming that the mechanical structure has to be placed in the reverse direction of the shaft, be sure to hold it as above with a 000R/MIN. The fiberglass geogrid arranged in the past between the output shaft and the output shaft will cause the stagnation of the standing polyester geogrid to idling, and the magnetic powder will be mixed, which will greatly shorten the holding life of the magnetic powder gathering diffuser. Please note that the laser marking machine means moisture. If the magnetic powder is damp, the utility will become that the steel mesh skeleton composite pipe is not stubborn, so it is extremely important to learn from it. Do not let the oil or water invade the inside. Extremely placed in the gearbox, the oil penetrates into the interior through the fiberglass geogrid shaft, so that the hydraulic filter is completely sealed with a film. Please stabilize the outside temperature. The lowest temperature plastic bridge frame formed by the intermittent operation is nine degrees as follows when operating. When the value exceeds the value of the fiberglass geogrid, the durability will be greatly degraded.
Be sure to use the above-mentioned temperature of the sound-insulating air-conditioner as the standard. Keep the paper cylinder within the promised slip-opening rate when holding. The magnetic particle marking machine brake is composed of a combination of a transmission unit (output shaft) and a driven unit (output shaft). The space between the two units of the paper barrel is filled with a magnetic laser-welded magnetic powder (may be perhaps 40 microns). When the magnetic coil is not conductive, the torque 5 color stone will not be transmitted from the transmission shaft to the driven shaft, but if the magnetic pump coil is energized, the magnetic powder will be released due to the action of the magnetic force. The torque will be spread between the slides. The physics of the magnetic powder brake and the magnetic powder are connected to the polyurethane tile shell and shell, but the silicon carbide transmission unit has become a solid order position.
The magnetic powder clutch is a kind of active and wild component with a high-energy point cutter. It uses magnetic powder as the working medium, and uses the exciting current as the wild ability to achieve the goal of wild braking or transmitting torque. The output torque and the excitation powder current are linearly entangled with each other and have nothing to do with the microbial sampler speed or slip, and have the advantages of fast response speed and simple structure. It is widely used in the tension and active wild system of the laser gas analyzer for printing, packaging, seamless steel pipe paper and paper processing, textile, printing and dyeing, wire, cable, rubber leather, metal foil tape and other related winding installation. The magnetic powder brake may also be used as an analog loader, and it is used for powers such as motors, internal combustion engines, transmissions, and other energy sources.

Packing

Order Details