Tel: +86-134-31394972
E-mail: sales@pre-webguidesystem.com
Tel: +86-134-31394972
E-mail: sales@pre-webguidesystem.com
The principle of use of the inflatable sleeve: it is a unique kind of winding, the reel, that is, the shaft that can be progressed after the immoderate strain is inflated, and the shaft whose a part of the ground is rapid retracted after deflation is known as the inflation...
Utility of inflatable sleeve clamp: it may be constant at any position of the inflation shaft to facilitate winding and unwinding. the riser sleeve is appropriate for the retracting of related machinery consisting of coating, printing, rewinding, paper making and plastics....
The riser material is made of high quality aluminum and the surface is oxidized. Equipped with high quality airbags and quick inflation nozzles. Good sealing effect, long service life and convenient maintenance. Technique parameter The inflatable sleeve (additionally referred...
The gasoline riser sleeve specially contains a the front sleeve, a rear sleeve, a cylinder frame, an inner tube, an air bag, a convex keyboard and so forth. the riser fabric is manufactured from top notch aluminum, oxidized at the floor, prepared with first rate airbags and...
Advantages of inflatable sleeve connection The inflatable sleeve (also known as the enlargement joint sleeve, the keyless bearing, and many others.) is a keyless coupling tool whose precept and use is through the movement of high-strength anxiety bolts, among the inner ring...
Structural use of the inflatable sleeve The inflatable sleeve or "flat sleeve" mainly includes the the the the the front sleeve, the rear sleeve, the cylinder, the internal tube, the airbag, the convex keyboard and so on. the inflatable sleeve is appropriate for the...
Air adapter introduction: 1. Use with the air-expansion shaft without affecting the normal installation of the air-expansion shaft; 2. Fix the inner wall of the inflation jacket by raising the inflation shaft, and the fixed position can be adjusted on the inflation shaft; 3,...
Air adaptor The fuel riser also can be written as an "inflated sleeve" Use: The gas riser sleeve is appropriate for the retracting of associated equipment such as coating, printing, rewinding, paper making, plastics, and many others. particularly in the case where...
The air collet chuck (also known as the expansion joint sleeve, the keyless bearing, etc.) is a keyless coupling device whose principle and use is through the action of high-strength tension bolts, between the inner ring and the shaft, the outer ring and the hub. A huge...
The plate type air expansion shaft, the key type air expansion shaft and the slip air expansion shaft are relatively common air expansion shafts. Specifically introduce: 1. Plate type air expansion shaft: The plate type air expansion shaft expansion part is a plate piece,...
The radial engagement of the two component expansion cylinders with the expansion core is a rigid fit, based on the use of a rigid connection between the two, using the expansion key to support the sleeve, rigidly connecting the sleeve to the expansion shaft to ensure...
Introduction to the inflation sleeve: Uses: The inflatable sleeve is suitable for the retraction of related machinery such as coating, printing, rewinding, paper making, plastics, etc. Especially in the case where the three- or six-inch gas-increasing shaft frequently uses...
русский 
Deutsch
Latviešu
اردو
slovenščina
Polski
বাংলা
bosanski
magyar
Srbija jezik (latinica)
România limbi