Products

Principle Although the inflation shaft is known as extra, the working precept is the equal. the air enlargement shaft and the air enlargement sleeve are extremely handy and brief to use. it handiest wishes to be self-contained, and the air pressure is managed in the range of...

Characteristics of the air growth shaft and a way to improve the service life of the air enlargement shaft The characteristics of the air-growth shaft and how to improve the carrier existence of the air-expansion shaft. because of the long carrier life of the airbag itself,...

Ten characteristics of convex key strip type air expansion shaft expansion tube The ten characteristics of the convex key strip type inflatable shaft expansion tube are as follows: 1. Reliable sealing connection: no coupling between tubes, good sealing and strong bearing...

The air enlargement shaft is split into a bulging kind air enlargement shaft (metal/nonmetal, the following determine), a blade kind air expansion shaft, a bulge kind air expansion shaft, an aluminum alloy air enlargement shaft, Differential air expansion shaft, spiral...

The fineness of the roll products is a measure of quality. Fine roll printing, ink is the key! In general, the criteria that should be followed for ink: the field, the line, the text, etc. require a large amount of ink, and the number of selected mesh lines is lower; the...

Aluminum tube is also called aluminum roller, it is made of advantaged aluminum alloy material. It has all kinds of modules and sizes. Inside the roller, there is a strong rib structure, chich is very fixed. And the Omni-axes is controlled by dynamic balance correction...

The use of the air-expansion shaft is a new bright spot in the progress of modern society. Many mechanical operations and operations are driven by it. Some people know it very well, but I believe more people still don’t know it. What is the scope of application. Next,...

Web Guiding Controller Concept: Correction Controller, also known as edge position control (E.P.C), developed and line position (L.P.C) center line position control (C.P.C) The Principle of Guiding Controller: During the material winding process, the position of the edge or...

1, the structure principle Mainly composed of curved mandrel, rolling bearing assembly, rubber sleeve, end sleeve, bearing and adjusting wheel. The curved roller bends the shaft into the required arc shape, and the bearing is mounted on the shaft at a certain interval. The...

The principle of linear propagation of high frequency ultrasonic wave is applied in the ultrasonic rectification sensor to detect the edge position of coil. Compared with optoelectronic sensor, it is not affected by material transparency, surface dust, wet water mist and so...

Feature: 1.Uniform cell shape,fast and even ink release. 2.Easy cleaning,ideal cell shape with smooth,steep walls flat bottom 3.Precise cell volume 4.As high a theoretical volume as possible. 5.Longer life expectancy. 6.Good corrosion resistance 7.High bond strength with the...

Specifications 1. material: rubber, polyurethane 2. type: sleeve, taper 3. size: custom as requests Introduction Polyurethane, commonly a new composite material between plastic and rubber, is formed after chemical reaction of polymer polyalcohol and isocyanate through chain...