What Problems Should Be Paid Attention To When Installing The Inflatable Shaft In The Machine?

Inflatable shaft and slip sleeve are composed of two parts. The inflatable shaft adopts central air pressure control. According to the user's model, it can be adjusted online without stopping, so that the piston on the shaft is ejected, each slip sleeve is braked to expand the sliding key outwards, and the paper tube (plastic tube, nylon tube) Wait). Adjust the torque force of each slip sleeve according to the inflation pressure to achieve the adjustment of the tension required for each roll of material on the slitting line, so that the slip sleeves will slide relative to each other, and its linear speed can be automatically adjusted.

This solves the problems of breakage, unwinding, unwinding and other problems caused by the change of the material thickness unevenness and tension when the mechanical slip shaft and the ordinary inflatable shaft are slitting and winding, and the material loss caused by this is avoided. And it can simultaneously collect large and small rolls on the unified slip air shaft. The winding speed is higher. Because the air pressure can be adjusted without stopping the machine, the machine's adaptation range and work efficiency are greatly improved.

Therefore, we need to pay attention to the following 6 points when installing the inflatable shaft in the machine:
1. When installing the inflatable shaft, the first thing to make sure is that the compressor that controls the air pressure is in a stable state. Install a filter directly between the compressor and the inflatable shaft to prevent impurities from clogging the air pipe and causing air leakage. ；
2. The air entering direction should be vertical to prevent damage to the valve;
3. When exhausting, you must use the standard matching exhaust port, and it is forbidden to use sharp hammers and other tools to avoid air leakage;
4. A pressure gauge and pressure control device must be installed, and the air pressure must be controlled within the range of 3-8kg/cm;
5. When replacing the air nozzle, a socket wrench must be used. If there is an internal failure and need to be disassembled and repaired, please ask professional maintenance personnel, do not disassemble it by yourself, so as to avoid unnecessary losses;
6. Handle with care to avoid hurting the air valve.