Why Do Magnetic Powder Brake Manufacturers Need To Replace The Magnetic Powder Regularly?

The magnetic powder brake is matched by a certain amount of magnetic powder. The magnetic powder has the characteristics of high magnetic induction, high permeability, low remanence, low coercivity, high Curie point, and large torque transmission. And has good heat resistance, wear resistance, thermal conductivity and chemical stability. In military, civil and other fields, it is mainly suitable for all kinds of magnetic powder brakes and automatic tension controllers with large rotation and high slip.

The magnetic powder in the magnetic powder brake has high purity, no black carbon powder, stable performance and long life. The magnetic powder brake cannot be used with over torque and speed, otherwise the service life of the magnetic powder will drop sharply, or there will be powder leakage or jamming.

If the magnetic powder in the magnetic powder brake is damp, the performance will become unstable, so be especially careful not to let oil or moisture invade the inside. Especially when it is installed in a gearbox, the oil will penetrate through the shaft, so it must be completely sealed with a film.

The unstable operation of the magnetic powder brake should be because the tension is not up to the required use during use, or the phenomenon of slippage occurs. If this happens, it should be replaced by the magnetic powder. The seals should be replaced at the same time as the replacement, and then check the bearing. , If there is a problem, replace it at the same time.

The longer the operation time, the higher the temperature inside and on the surface of the magnetic powder brake. In addition, if the weight of the load is greater, the rotation resistance required is greater, and the higher the operation frequency, the faster the consumption of magnetic powder.

Replacing the magnetic powder for installing the magnetic powder brake is an important step. If it is installed incorrectly, it will cause serious consequences. If in doubt, consult the manufacturer of the magnetic powder clutch before proceeding. Nantong Xinte Electromechanical Technology Co., Ltd. is a professional manufacturer of magnetic powder brakes. Welcome to consult and negotiate!