How To Extend The Service Life Of The Cloth Guide Roller Of Dyeing And Finishing Machinery

The stainless steel cloth guide roller is used for the open-width transmission of fabrics in printing and dyeing machinery, and is used for single-width threading and yarn guiding in various dyeing and finishing machinery. Let's briefly understand the cloth guide roller.

Structure: Generally divided into common TMG2 and common MT001 type. The material is stainless steel, which can extend the service life of the cloth guide roller.

Fixing method: rotating coaxial type, fixed shaft bearing type. You can choose according to your own situation.

Transmission mode: passive sliding bearing, passive spherical rolling bearing, etc.
Application: Used in various textile machinery and equipment such as various series of sizing machines, sizing machines, combined machines, and stenter frames. It is a general-purpose part of dyeing and finishing machinery, and is also widely used in other machinery industries.


For cloth guide rollers with good performance, reasonable storage is indispensable:
The cloth guide roller is suitable to be stored in a cool and dry place, especially moisture is not allowed, otherwise it will easily cause the cloth guide roller to rust. The cloth guide rollers should be stacked neatly and do not put them in disorder. This will cause the bending, deformation and life of the cloth guide roller. Shorten and so on.

In the printing and dyeing industry, drying is a process that consumes more energy. Improving the efficiency of the drying machine is one of the important means of energy saving and emission reduction in the printing and dyeing industry. The ordinary drying machine adopts steam drying method, which has low efficiency and high energy consumption. Therefore, there is an urgent need to improve the drying machine and increase the heat utilization.

A new type of drying machine is provided, by using an infrared radiator as a heat source, and designing the cloth guide roller to be installed obliquely and connected end to end, which improves the heat utilization rate and saves production costs.

The new type of drying machine includes an oven. The two sides of the outside of the oven are respectively equipped with a cloth placing mechanism and a cloth collecting mechanism. There are several cloth guide rollers inside the oven. A blower is installed at the entrance of the oven. The six inner walls of the oven are respectively equipped with infrared radiation. The infrared radiator is used as the heat source instead of the steam heat source, which improves the thermal efficiency and improves the drying effect. By recycling and reusing the dried hot air, energy consumption can be further reduced.