Advantages And Characteristics Of Slitting Machine

Advantages of slitting machine

The paper tube slitting machine is equipped with a main shaft for processing paper tubes in the middle. The front end of the main shaft is fixed on the base with a set of bearings, and a belt pulley is installed in the middle of a set of bearings; a compression cylinder is installed near the base to support the cylinder. A set of support rod bearings is installed at the upper end of the rod to support the main shaft.
The main knife shaft is installed on the upper end of the paper tube slitting machine, and a number of blades are arranged on it, and they are arranged at a certain gap; the main knife shaft support frame is also set at the top of the paper tube slitting machine, in the support frame A supporting cylinder is installed in the middle.

The structural advantages of the paper tube slitting machine fill the technical gap of the automatic tube cutting machine.

Slitting machine features


1. Simple operation control panel: each part of the machine is controlled, centralized panel operation.
2. Three-stage length setting: advanced three-stage degree finding and counting to ensure accurate winding length.
3. Automatic shaft exchange: After the winding operation is completed, the two shafts are automatically exchanged, which is easy to operate and high in efficiency.
4. Labeling instructions: After reaching the labeling length, the machine will stop automatically, and paste the label marks indicating the film mouth on the platform.
5. Rear feeding method: feeding from the rear side of the operating surface, with a rubber pressing wheel to reduce the noise of peeling the tape, and to discharge the material smoothly.