Use And Maintenance Of Mirror Roller

Mirror rollers should pay attention to the following maintenance during use:
1. Under normal circumstances; when the roller is installed in the frame; in general, it will not be arbitrarily removed; but the service life of the roller should be prolonged; the scientific method is to release the oil or water in the roller ; Then pass in the anti-rust oil; when used, release the oil again; clean and degrease; then use it in the normal way;
2. When the roller is heated or cooled before use; the roller should be adjusted to slow rotation; this is conducive to the roller heating or cooling, which will not be caused by its own weight to cause uneven temperature rise and deformation; it is to extend the roller A type of service life;
3. When the roller is removed from the frame; the internal water should be removed; then the anti-rust oil or butter on the surface of the roller is then packaged with PVC protection and then repackaged with soft packaging; this way It is beneficial to protect the surface of the ultra-mirror roller from chemical reaction with acid or alkaline gas in the air; it will reduce the surface finish; if it is serious, the roller surface will be repaired; it will cause loss;
4. When the roller is not in use; be sure to lay the roller flat in the protective frame; prevent the roller surface from contacting foreign objects and damage its surface quality; when installing or storing; be sure to handle with care; it is strictly forbidden to touch and damage event;
5. When the roller is in use, it generates static electricity by friction with the pressed material; it will attract the powder layer in the air to the surface of the super mirror roller; when it is used for a certain period of time, if there are more foreign substances on the surface of the roller; use soft Cloth or sponge items with water wax products; gently wipe left and right on the roller surface (back and forth motion); it is beneficial to extend the high-quality use of the roller surface;
6. During machine production; when all kinds of materials enter the roller working surface; the material surface should not be calendered (to the full open); because the material will not be calendered; therefore, the mobile type caused by the rapid hardening of the material occurs from time to time Scratches; to cause scratches on the surface with high finish; of course; if it does not affect the quality, it can be used; if the quality of the production material is affected, it needs to be sent to the roller processing plant for surface polishing; if you pay attention to this in production When the problem is similar, the abnormal problem caused by the roller can be reduced to extended use.
7. If the production environment does have a heavier chemical gas; it is recommended to use the outer frame of the roller frame and the host part to block the space in the workshop; this can be used for the roller and the machine to be extended.
8. Extending the service life of rollers is very important for the materials being produced by manufacturers; such as the production of recycled materials or second and third grade material manufacturers; Needless to say, the life of super mirror rollers will also be known; but for the production of new The manufacturer of the material type; at the same time, pay attention to and require the operator to update the filter screen in time when the screw pressure exceeds the normal value; the number of filter screens should be determined according to the cleanliness of the material to be produced; this must be relevant and important in the production enterprise Requirements; it is the basic guarantee to improve the service life of the roller.
9. Pay attention to and guide every detail when using high-finish rollers; it is possible to extend the service life of the rollers in the true sense; systematic management supports the rollers to increase their service life.