Maintenance Instructions For Slitting Machine

Regarding the maintenance of the slitting machine, I believe that many customers who use the slitting machine want to know more about it, which will help efficient production and increase the service life;

The main parts of the automatic slitting machine should be inspected and lubricated before use; when inspecting and disassembling the automatic slitting machine, it is strictly forbidden to use unsuitable tools and unscientific operating methods; check the machine every two weeks Make a comprehensive cleaning and inspection; if the automatic slitting machine is not used for a long time, all the bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic cover to cover the whole machine. If the automatic slitter is out of service for more than 3 months, the anti-rust oil should be covered with moisture-proof paper; after the work is completed, the equipment should be carefully cleaned, and the exposed friction surface should be wiped clean and lubricated.

Daily maintenance should do well the daily maintenance and maintenance of the slitting machine to do the following five points.
1. Clean and inspect parts of electrical appliances regularly to remove hidden dangers in time.
Second, the use of the slitting machine is completed by the slitting machine and the cross-cutting machine. Therefore, high-quality slitting knives and cross-cutting knives must be used.
Third, the daily maintenance of the slitting machine must be in place. The criterion is to be smooth, clean and clear (no dust, no debris) in place to ensure that the sliding parts of the equipment are in good condition.
Fourth, it is maintenance work. Regular and irregular inspections of rotating parts should be stopped (especially real-time monitoring of vulnerable parts should be stopped). Carry out regular adjustment, regular change, commutator and make meticulous records, in order to achieve the purpose of extending the service life of the equipment.
Fifth, improve the technical quality and level of the personnel who operate the slitting machine. The operation of the control part must be assigned by a special person, and no one can operate by himself without permission.