Introduction To The Working Principle And Application Range Of Photoelectric Guiding Device

Photoelectric correction device (photoelectric correction sensor) is a closed-loop control system, sensor, controller, linear guide mechanism to form a basic part of closed-loop control. First, the correction sensor detects the edge or line of the coil, and reads the actual position and setting of the coil. The offset of the position and converts the offset into a proportional electrical signal.

The electrical signal is sent to the controller, and the signal is amplified and calibrated by the controller, and then output to the linear driver. The linear driver drives the correcting and guiding mechanism according to the size of the signal to restore the coil to the set position. The drive signal of the current drive is only proportional to the amount of deflection of the coil, which enables precise control of various coils and photoelectric correction systems.

Product performance 1, with power-off memory function, with automatic, manual, and three working modes 2, single and dual digital output optional 3, any material for detection and control 4, easy to install, simple operation speed Tune.

The photoelectric correction system (photoelectric correction sensor) is a system for controlling the horizontal position shift of thin soft materials during the transmission process, and has functions of automatic detection, automatic tracking, automatic adjustment and the like. It can track and correct the marking lines or edges of paper, film, self-adhesive tape, aluminum foil and other materials to ensure the winding and slitting are neat.

Application of photoelectric correcting device: laminating machine, laminating machine, printing machine, coating machine, paper machine, dyeing and finishing machine, bag making machine, slitting machine, winding, unwinding and rectification during process. The system can be used in light industry, textile, printing and dyeing, EP brush and other industries.