It Is Necessary To Clean The Cloth Guide Roller In Time

Stainless steel cloth guide rollers are mainly suitable for various textile machinery equipment such as various sizing machines, pulp dyeing machines, combined machines, setting stenters, etc. Over time, long-time operation of the cloth guide rollers will cause the surface of the cloth guide rollers to accumulate A layer of dirt, regular cleaning of this layer of dirt, is conducive to improving the quality of dyeing and finishing.

With the accumulation of dirt, it is very easy to cause scratches on the cloth surface, which causes defects and reduces the quality of the product. Therefore, it is necessary to clean the cloth guide roller in time, but the removal of the cloth guide roller is very certain Difficulty.

Due to the narrow space in the washing tank, the operator enters the tank to use physical methods to remove dirt, which is labor-intensive, and the scraper, file or sandpaper used in the physical cleaning method can easily scratch the cloth guide roller. Because there are partitions between the bottom guide rollers, it is easy to cause scratches and scratches on the operating parts during the operation process. Therefore, in order to improve product quality and work efficiency, it is imperative to develop chemical cleaning aids for the guide rollers dirt .

The cloth guide roller is an important component dedicated to printing and dyeing machinery. The cloth guide roller is lubricated on the outside, not easy to rust, good straightness, and not easy to be bent and deformed. But sometimes, due to various reasons, the cloth guide roller will also present some quality problems, which are summarized below.

Bubbles on the outer surface of the cloth guide roller are usually formed during manufacturing. The main reasons are: the ingot has a high hydrogen content and is loosely arranged; the uneven surface of the ingot has a dirty east surface, which is not cleaned before use; after cleaning, there is no inspection of the traces of erosion and washing on the surface of the ingot and the bag; Or the temperature is too high, the surface of the ingot is oxidized and so on.

The scratches on the surface of the cloth guide roller are usually irrelevant to the manufacturing technology and are often artificial. Careless handling during lifting will easily lead to scratches on the cloth guide roller; collision with other items will leave scratches; straighten the bent belt plate during rolling, so that the belt plate and the cloth guide roller will rub against each other and cause scratches.