The Rubber Bending Roller Is Tasteless, Non-toxic And Has No Adverse Effects On The Human Body

The main performance characteristics of rubber bending rollers:

1. Excellent high and low temperature resistance, working temperature range-100 to 350 degrees. Excellent resistance to ozone aging, oxygen aging, light aging and weather aging. The performance of the silicone roller is kept outdoor for several years in a free state. Therefore, it is one of its conveniences to use the silicone roller in many industries.

2. Excellent electrical insulation performance, the electrical insulation performance of the silicone roller changes little when wetted, frequency changes or temperature rises, the silica generated after combustion is still an insulator, so in some environments that require insulation, the silicone The frequency of roller use is also high. In addition, there are few carbon atoms in the molecular structure of the silicone roller, and carbon black is not used as a filler, so it is not easy to scorch during arc discharge, so it is very reliable to use in high-voltage occasions. The corona resistance and arc resistance are extremely good, the corona resistance life is 1000 times that of polytetrachloroethylene, and the arc resistance life is 20 times that of fluororubber.

3. The silicone roller has special surface properties and physiological inertia. The surface energy of the silicone roller is lower than most organic materials. Therefore, it has low hygroscopicity. Soaked in water for a long time, its water absorption is only 1%, the physical and mechanical properties are reduced, and the mold resistance is good. Therefore, silica gel is also used in underwater operations or in humid environments. In addition, the silicone roller does not stick to many materials and can play a role in isolation.

4. Silicone roller silicone rubber is odorless, non-toxic, has no adverse effects on the human body, the body reacts slightly, and has excellent physiological inertia and physiological aging.

5. High air permeability. Compared with other polymer materials, the silicone roller has extremely excellent air permeability. The air permeability at room temperature is 30-40 times that of natural rubber. In addition, the silicone roller also has gas permeability. The selectivity and permeability of different gases are different.

The life of the rubber bending roller is not only related to the raw materials used in the manufacturing process, but also related to the maintenance in daily life. If you don't pay attention to maintenance and maintenance, the best rubber roller will quickly break down. Something that can be used for a few years may break in one year. If you pay attention to daily maintenance and maintenance, use 2-3 Years are not a problem. Of course, you should pay attention to the step-by-step operation according to the instructions in the operation process. You should often check the usage of the rubber roller. After use, you should take it lightly and put it in a suitable position to choose a good storage environment.

The correct storage method is: wash the rubber roller with clean water, then seal it with plastic film, so that it is not in contact with the air, and then place it in a special storage place, must not be slanted, affecting its internal mechanical properties and The quality of the rubber surface.

The internal bearings and shaft heads need to be well lubricated. We recommend that under normal circumstances, the rubber rollers used must be maintained every week, and the lubrication of the rubber surface and the interior must be good enough.