What Needs To Be Prepared When The Toilet Paper Rewinder Equipment Is In Operation

The toilet paper rewinding machine equipment is professionally used in the manufacture of toilet paper, and the toilet paper rewinding machine equipment should be cautious in use. Trial operation of toilet paper rewinding machine equipment should be prepared before the trial operation. The following Shandong Haitian Paper Machinery Co., Ltd. will introduce to you the preparation work before the trial operation of toilet paper rewinding machine equipment:

[What are the preparations for toilet paper rewinding equipment?]

1. Before trial operation of the toilet paper rewinder equipment, carefully check whether the installation of each component of the toilet paper rewinder is in place. If you want to tighten the nut, the reducer should also be lubricated according to the standard of roller skating;

2. Check whether there is heat in the bearings and reduction gears of the toilet paper rewinder equipment, whether the upper and lower chains are blocked or run off, and whether the motor is overloaded.

3. After the physical operation is qualified, it must be continuously operated for 12 hours before it is officially transferred to production;

4. Strictly check whether the bolts and nuts of the flying knife and the bottom knife have been tightened;

5. Carry out the separate operation of the cutter wheel and the feeding, and then carry out the comprehensive no-load operation after the normal operation. After the inspection is correct, then carry out the physical test operation.

Causes of leakage at the meshing position of the paper machine
The reason for the leakage of the meshing position of the paper machine, the complete set of equipment that links the pulp to the paper web is called the paper machine, which includes the head box, wire section, press section, drying section, calender, paper roll and The main unit such as the transmission department and auxiliary systems such as steam, water, vacuum, lubrication, and heat recovery.

Due to the uneven distribution of the center of gravity of the drying cylinder (the drying cylinder weighs about 5 tons per cylinder), and the drying cylinder is heated by steam, during the operation of the equipment, high-pressure steam forms condensate in the drying cylinder, which causes condensate during high-speed operation Unfavorable drainage in the dryer

A centrifugal force is formed inside, and the dryer can only release the force to move towards the two ends of the dryer, causing a certain frequency of vibration generated at the gear meshing position. Generally, modern multi-cylinder paper machines are composed of 55-80 cylinders, and the paper machine produces such vibration together during operation, causing leakage at each meshing position

The company has the ability to develop, design, manufacture and install various net paper machines, stacked net paper machines, rotary net paper machines, inclined net special paper paper machines with a net paper width of 1760-6700mm and a speed of 100-1000m/min. Can also provide users with paper machine transformation and upgrading services.