Features Of Fully Active Toilet Paper Rewinder

First put the material paper rack on the paper feeding rack (three-axis paper). The paper feeding rack has active paper feeding equipment and paper feeding equipment, and then the paper is passed to the paper feeding roller, and there is a bar device before the paper feeding roller to spread the paper surface. Flat, the backward punching equipment finally enters the guide roll equipment.

The paper roll of the rewinder is finished by repeating guide rolls with guide rolls and pressure rolls (the tightness of the roll paper is adjusted according to customer requirements, and it can be adjusted at will by air pressure). The roll paper reaches a certain standard and the machine will automatically park the paper. Take the initiative to launch. Separate the roll paper by a paper cutter, and automatically spray glue to seal the slitting paper. After the entire program is completed, the machine will automatically start again after the start-up delay is reached. After the product comes down, the big saw will cut the paper into rolls of different standards (customers require slitting). The whole process is controlled by computer programming PLC and frequency conversion.


Features of Fully Active Toilet Paper Rewinder
1. The full-automatic toilet paper rewinder can choose double-sided embossing and gluing compound. Compared with single-sided embossing, it can make the paper softer. The double-sided effect of the product is the same, and each layer of paper does not fall apart during use, which is especially suitable for processing. Roll kitchen paper towels, and the weight is reduced by 15% or more when making products of the same size.

2. The machine is equipped to process centerless, solid, and roll-tube toilet paper, which can switch between products in an instant, and can also be selected according to user needs.

3. Active trimming, glue spraying, sealing, and shaft pulling are completed in an instant, so that there is no paper loss when the roll paper is transferred to the band saw for blocking and packaging, thus greatly improving the production power and the level of the product, and the product has a paper tail , Facilitate the activation.

4. Pneumatic belt feeding, the rewinding shaft and each shaft of the base paper have independent tension adjustment mechanism.

PRE Converting is capable of researching, developing, designing, manufacturing and installing various fourdrinier paper machines with net paper widths of 1760-6700mm and speeds of 100-1000m/min, such as multi-wire paper machines, cylinder paper machines, and inclined-wire special paper machines. At the same time, it can also provide users with paper machine transformation and upgrade services.