Several Problems And Solutions Of Toilet Paper Rewinding Machine

The weight of the rolled paper stick is different for each roll. The number of windings is fixed on the computer. But the weight is always increasing.

Processing method: First, the weight of the rewinder paper you roll out is different for three reasons, one is that your width is different every time you turn, the second is that the original paper quantitative banner has changed, and third, you do not stretch the roller to form Part of the wrinkles, so the weight becomes larger.


2. Only started now, always wasting a lot of paper. How to use it reasonably? Treatment method: how to use paper to reduce waste. This is what you usually pay attention to; first of all, you have to work hard to buy, the width of the big paper roll to buy should be appropriate, so the two edges are cut less. Secondly, when rewinding, try not to break the paper, do not appear unqualified products, this can reduce waste.


3: The paper cutter always removes the roll paper, how to adjust the horizontal point. Processing method: The paper roll cut by the cutter is always skewed. This is to parallel your large paper roll with the roller of the rewinder, otherwise the paper will be skewed and skewed. Also, the curvature of your stretching roller should be adjusted well, otherwise there will be deviation.


4: The right side of the paper roll of the rewinding machine is always in the broken part, and the result is always that it does not roll. Can't scroll. Treatment method: If the right side is always broken, then you need to check whether the paper force on this side is greater than that on the left side, not the stretching roller or the large roll of paper. This side is more inclined, resulting in this side of the paper being too tight and broken.


Rainy days are always a problem. Is this related to wet paper? What should I do? Rain is always consumed. Processing method: toilet paper has better ink absorption. Due to the large air humidity ratio in rainy days, it may have a large number of outer and inner layers that are different. The deformation of the paper, the change of strength, the time to form a roll of paper is easy to destroy, and the quantitative bias. To eliminate this problem, we must consider the ventilation of the workshop, and try to insist on boring the workshop.