The Inflatable Shaft Is Specially Processed Pipe

There are five possibilities for inflatable shaft leakage:

1. The hose is leaking. This phenomenon is that the quality of the hose itself is not good enough. After it is installed, it will leak if it has been inflated.

2. There is a gap in the sealing ring. Install the sealing ring and pour a ring of sealant on it.

3. The air nozzle is leaking and the air nozzle is not installed properly, just replace it with a new air nozzle and install it.

3. The hose is broken. If this is the case, it will be troublesome. You need to remove the shaft head and replace it with a new hose.

5. The pressure ring is loose, the dehumidifier is relatively easy, just tighten the pressure ring.

Inflatable shafts are called many, but the operating principles are the same. Inflatable shafts and inflatable sleeves are extremely convenient and convenient to use. You only need to prepare your own air source. The air pressure is controlled within the 0.5-0.8MPa plan, and the external components need to be locked ( For example, a circular paper tube), you only need to inflate the air nozzle on the inflatable shaft, and the key strip will be able to withstand external parts (such as a circular paper tube). When you need to relax the paper discharge, Press the sliding air core on the air nozzle to release the air, the key bar will return to the original posture, and the external parts (such as the circular paper tube) can be taken out of the professionally produced inflatable shaft to repair the inflatable shaft.

Due to the long service life of the airbag itself, the damage rate of the inflatable shaft is reduced, which also reduces the downtime rate of the unit itself during the entire production process, resulting in the reduction of customer bad products. Save the customer's production costs. The service life of the inflatable shaft will affect the consumption cost of the user. Because the inflatable shaft is made of specially processed pipes, the stable function of the material enables the inflatable shaft to overcome the common shortcomings such as deformation and twists of the inflatable shaft in use, ensuring that the production line unit can operate stably under high-speed production conditions. The reliable and stable operation function brings customers the practice of achieving high-end products. Convenient use: Compared with the usual high-quality layout steel, the inflatable shaft has a very light weight, which reduces the physical strength of the production operator and inconvenient operation. Based on the width of 1350mm, the weight of the normally used inflatable shaft itself is about 24kg, while the product of Kuribayashi is 14kg.