Safety Operation Rules For Setting Control Of Slitting Machine

1. Set the slitting menu according to the film type, thickness, length, width, etc. arranged in the slitting plan.
2. Lift the corresponding BOPP film file from the PDF.
3. Set the rewinding length and width of the corresponding specification film.
4. Select the corresponding winding station, adjust the pressure roller arm and pressure roller, and install the paper core of the corresponding specification.


Safety Operating Regulations for Film Slitting Machine
1. Turn on the electrical isolation switch (set in front of the electrical control cabinet), press the EMERCENCY STOP RESET and READY TO RUN buttons, turn on the MACHINE to RUN (on the main console) and check whether the voltage (380V) and current are correct and stable.
2. Turn on the power switch of the hydraulic system (set on the main hydraulic drive frame), and check whether the oil level of the main hydraulic drive system and the pressure gauge display are correct and stable.
3. Open the pneumatic shutoff valve (set on the intake pipe under the pneumatic control cabinet), and check whether the air pressure is correct (not less than 6.0bar) and stable.

Advantages of web slitting machine
1. Centralized panel operation, integrated circuit control. All parts of this machine are concentrated on the panel operation control.
2. The main functions of the panel: A. Spindle speed adjustment B. Rewinding length setting C. Unwinding tension adjustment D. Rewinding tension setting E. Start and stop buttons.
3. The cutting knife adopts upper and lower round knives. And can change the lower pad according to different cutting width, adjust the cutting width to achieve high-quality cutting quality.