The Correction System Is A New Type Of Correction System For Automation Technology In The Light Industry

The correction system is a new type of correction system for the automation technology of the light industry. The correction system uses single-channel or two-channel large digital optics, uses rare earth permanent magnets to communicate with AC motor drive ball screws as electric actuators, and is operated by all digital circuits. It is suitable for all kinds of places where the cutting material horizontal correction system must be carried out. It can be used in conjunction with the block machine, bag making machine, compound machine, screen printing machine, paper machine, printing equipment, textiles, and building materials equipment. The equipment supporting facility is an ideal commodity suitable for the place of correction device with medium speed (200m/min) and linearity of ±0.3～±1mm, and its technical strength is leading in China.

1. The staff on duty every day inspect the installation level and precision of the machinery and equipment in the district and city, and make detailed records and archive them for reference.

2. For high-precision machinery and equipment with special requirements for the natural environment (temperature control, humidity control, vibration isolation, anti-fouling) in the correction system, the company must take effective countermeasures to ensure that the precision and characteristics of the machinery and equipment will not be harmed.

3. High-precision, scarce, main equipment generally does not need to be disassembled and assembled in normal maintenance, and it is very electronic and optical components. When disassembling and assembling must be carried out by professional maintenance workers. If any abnormality is found in the operation of machinery and equipment, the vehicle must be parked immediately, and operation with failure is not allowed.

4. Strictly implement the production and processing categories required by the machine and equipment manual to carry out actual operations, and do not allow machines and equipment that exceed specifications, super net weight, overload, and excess working pressure. High-precision machinery and equipment are only allowed to carry out deep processing according to the immediate main purpose, the feed rate must be effective, and the production and processing of castings and rough surfaces must be sandblasted or painted in advance.

5. The lubricating grease materials, scrubbing raw materials and cleaning agents of the machinery and equipment must be applied strictly in accordance with the requirements of the instructions for use, and cannot be replaced at will. Lubricating grease must be inspected to reach the standard, and must be filtered before adding the car fuel tank.

6. High-precision, scarce machinery and equipment must be protected during flexible working hours. If there is a long-term suspension, scrubbing, moisturizing, and air cargo transfer should be carried out on time.

7. The notes of machinery and equipment and common tools need to have a special shelf space, and they should be kept clean to avoid rust and knocks. They cannot be loaned out or used for other main purposes.

8. The moistening work of the machine and equipment of the correction system is a key step for the on-site application and maintenance of the machine and equipment.