What Are The Application Fields And Principles Of The Correction System?

The automatic control system of the coil correction device is a closed-loop control, a control board, a controller, and a linear guiding organization constitute the basic part of the feedback control. The first correction device controller detects the edge or wire frame of the coil and reads the specific details of the coil. The offset between the part and the set part, and convert the offset into an electronic signal proportional to it, and then send the electronic signal to the control board. After the control board becomes larger and corrected, the data signal is output to the linear controller, which is based on The size of the data signal, the drive correction device guides the organization, and restores the coil to the set position. The drive data signal of the current standard controller is only proportional to the amount of deviation in the direction of the coil, which promotes accurate manipulation of various coils and correction systems.

The control board of the rectifying device refers to the coils manufactured by the manufacturer during the whole process of painting, packaging and printing, shearing, laminating, splitting or other coil rewinding machines, and used to keep the sides of the coils neat and consistent from beginning to end. Technical practical operation. Once the edges of the coil are not aligned at both ends, it will cause subsequent process errors, resulting in extravagant waste of raw materials or stop production adjustments. Therefore, in the case of solving the production and processing of coils, it is necessary to carry out the actual operation of the deviation correction device for the offset coils. This whole process is called the correction device. All the steps of machinery and equipment constitute a set of correction system.

The correction system involves a wide range of manufacturing in packaging, packaging and printing, signs, building decoration materials, paper pulp, household paper, plastics, clothing, cables, metal materials, laser cutting processing, non-proof cloth, corrugated cardboard production and processing, etc. All industries are indispensable. A typical correction system includes a correction device control board, a correction device induction switch, a correction device architecture and a controller.