Things To Pay Attention To When Using A Correction Device

The general automatic control system of the correction device can be maintained. However, if the rolling speed of the raw material must be changed, and the general correcting device cannot change the speed of the correcting device, it will cause the curling to be uncorrected, the tension resistance or the uneven thickness of the raw material and various mechanical equipment Hazard, causing raw materials to move up and down on the production line and unilateral deviation, resulting in the production and processing postures in the central area not easy to cooperate with each other, or the collection and delivery postures of the front and rear, left and right sections are not level, resulting in damage to many raw materials and subsequent production and processing Difficult. Optical edge-to-line equipment can handle this problem. The correction device is used for: screen printing machine, self-adhesive machine, laminating machine, slitting machine, rewinder, printing and packaging machinery and equipment, etc. and opposite parts.

The basic principle of the correction system: the infrared/ultrasonic/laser/invisible light is transmitted from the correction device B to detect the operation of the waterproof membrane, and the data signal is sent to the control board A. After the control board finds that the waterproof membrane is drifting, it will operate the correcting device structure C according to the controller D to shake according to the command set by the controller in advance to correct the waterproof membrane. The automatic correction system for waterproof membranes uses photoelectric switches to inspect the edge of the waterproof membrane, and sends the measured deviation data signal to the control board. After the resolution of the control module is resolved, the driver motor is manipulated to produce the waterproof membrane at the wrong part Correct to the appropriate part.

The automatic control system of the correction device (correction system) is a closed-loop control control panel, control panel, controller, and linear guiding organization forming the basic part of feedback control. The first correction device detects the edge or wire frame of the waterproof membrane.