The Protection Of The Folding Mask Machine Is Divided Into Several Aspects

Five characteristics of non-woven mask machine:

First, the non-woven mask machine uses ultrasonic welding, which eliminates the need for needlework and saves the trouble of changing needlework repeatedly. There is no broken joint condition of traditional thread sewing, and it can also neatly cut and seal textiles. The stitched together also has a decorative effect, strong adhesion, can reach the waterproof effect, clear embossing, the surface has a three-dimensional relief effect, the operation speed is fast, the product effect is more high-end and beautiful; quality is guaranteed.

Second, the non-woven mask machine uses ultrasonic to process special steel wheels. The sealed edges do not crack, do not hurt the edges of the cloth, and there is no appearance of burrs or curls.

3. It does not need preheating during manufacture and can be operated continuously.

Fourth, the operation of the folding mask machine is simple and concise, and there is not much difference between the operation methods of the traditional sewing machine, and usually the sewing machine can be operated.

Five, low cost, 5 to 6 times faster than traditional machines, and high efficiency.


The maintenance and protection of the non-woven mask machine is proper. It can not only delay the decline of the accuracy of the non-woven mask machine, but also reduce the probability of equipment repair.

Folding mask machine, Dongguan folding mask machine, mask machine

Generally, we divide the protection of non-woven mask machine and folding mask machine into several aspects: appearance, transmission system, electrical system, ultrasonic system, and pneumatic system. (It is necessary to protect and maintain the equipment after shutdown and power failure)

Appearance: Masks are used on the face, and some of them are even used in the operating room. Therefore, the production of masks requires the non-woven mask machine to be cleaned neatly. Every day after work, you need to arrange for people to clean the work surface of the equipment and the dishes that hold masks after the power is turned off. Pay attention that you cannot use water, oil, and other non-toxic and volatile cleaning liquids such as alcohol.

Transmission system: The transmission system includes motors, gears, reducers, sprockets, chains, conveyor belts and other components. Let's check whether there are dust and other things on the outer surface of the motor that affect heat dissipation. Are the gears and sprockets oiled or not Attachments. Is the chain tightness suitable for foreign matter? Is the connection screw between the transmission parts loose? Is the lubricant of the reducer sufficient? It is usually necessary to replace the lubricating oil once every 1000 hours to 1500 hours.

Electrical system: Check whether the circuit connections of the equipment are loose, and whether the main power lines, branch signal lines, etc. are worn. Ageing? Loose electrical equipment? Is the inside of the electrical box clean and boring, and is the exhaust fan operating normally?

Ultrasound system: (consisting of an ultrasonic electric box, a stirrer, a welding head, and a connecting wire) Check whether the ultrasonic system is clean. In particular, the ultrasonic electric box, a stirrer (transducer), and a welding head (enlargement ratio) have Necessary boring cleaning without water, the connection line must be firm. Always check the wear of the ultrasonic welding head. Pay attention to the scale of the voltmeter and ammeter pointers on the folding mask machine.

Air supply system: (by air source filtration system, air pipe, cylinder)