Method For Checking Common Problems Of Folding Mouth

It is very important that the mask equipment is purchased and maintained. The main maintenance is in place. The equipment is also very smooth in operation. The masks produced meet the standards. The area affected by this detail is very large. Here's how we check common problems and solutions:

I. Appearance:

Folding mask machine

Masks are used on the face, and some even go to the operating room, so the production of masks requires a mask machine to be cleaned daily. At the end of each day, you can arrange for personnel to clean the work surface of the equipment and the dishes that hold masks after the power is turned off. Be careful not to use water, oil, and other non-toxic and volatile cleaning liquids such as alcohol. Folding mask machine manufacturer

Second, the ultrasound system:

Check whether the ultrasonic system is clean, especially the ultrasonic electric box, ultrasonic transducer, and welding head must be cleaned monotonously without water, and the connection line is robust. Frequently check the wear of the ultrasonic welding head (mold). Pay attention to whether the pointers of the voltmeter and ammeter on the ultrasonic electric box are normal.

3. Transmission system:

The transmission system includes motors, gears, reducers, sprockets, chains, conveyor belts and other components. Mask machine protection needs to check whether the surface of the motor has dust and other things that affect heat dissipation, and whether the gears and sprockets are oiled or attached. Is the chain tightness suitable for foreign matter, is the connecting screw of each transmission part loose? Is the reducer's lubricating oil sufficient? Usually, it needs to be replaced once every 1000 hours-1500 hours.

Fourth, the electrical system:

Check whether the circuit connector of the mask machine is loose. Is the main power line, branch signal line, etc. worn out? Aging? Loose? Is the inside of the electrical box clean and monotonous? Is the exhaust fan working properly?

Five: Pneumatic system:

Is there water in the air filter inspection? Check for air leaks in the air pipe? Are there any air leaks in the air cylinder? Orientation and operation of the magnetic sensor of the air cylinder is normal.

In addition: The equipment must not touch corrosive liquids and objects, for example: sweat is very easy to cause equipment parts to rust. If the equipment is not used for a long time, it is necessary to apply anti-rust oil to the drive system and rust-prone parts of the mask machine.

This is what we need to do after purchasing mask equipment, which will make the mask equipment work for us for a long time.