Things To Note When Using The Guide System

Ordinary deflector control systems can be implemented. However, if the material roll speed needs to be changed, but the ordinary deflector cannot change the speed, it will lead to the phenomenon that the edge cannot be straightened. Pulling force or uneven thickness of the material and various types of mechanical damage will cause the material to be controlled on the production line The phenomenon of movement and unidirectional deviation makes it difficult to cooperate with the processing operation of the middle section, or the unevenness of the receiving and sending operations of the front and rear sections, resulting in the loss of many materials and the subsequent processing difficulties. Photoelectric edge-to-line device can solve this problem.偏 Corner is used for: coating machine, self-adhesive machine, laminating machine, slitting machine, rewinding machine, packaging and printing machinery, etc.

Principle of the correction system: The rectifier B sends infrared light / ultrasonic / laser / visible light to monitor the operation of the coil, and sends the signal to the controller A. After the controller finds that the web has a position drift, according to a command preset by the controller, the controller D controls the correction frame C to swing to correct the web position. The automatic web correction system uses a photoelectric sensor to detect the edge position of the web and send the measured position error signal to the controller. After the control unit judges and processes it, it controls the drive motor to correct the web with the deviation to the correct position .

Correction control system (correction system) is a closed-loop controller, controller, sensor, linear guide mechanism forming the basic part of closed-loop control. First, the corrector detects the edge or line of the coil.

The correction technology has developed rapidly in recent years. Take the printing and packaging industry as an example. The production equipment responsible for processing strip-shaped materials is equipped with a high-performance automatic correction control system. Based on the premise of the quality of the produced products, it has been improved by at least 5 times. It ensures that the material does not deviate from the correct position, because even small errors cause waste products that cannot be afforded by any company.

The main application areas are:

Tire and rubber industry: molding machine, carcass cord pre-correction, tire side pre-correction, common drum common template correction, inner lining pre-correction, two-way stretching machine, film blowing machine, industrial belt laminating machine.

Packaging, printing and papermaking industry: correction of satellite rotary printing press, correction of concave-convex plate printing machine, correction of inspection machine, correction of slitter and rewinding machine, correction of coating machine, etc.

Battery industry: lithium battery coating machine, lithium battery slitting machine, lithium battery rolling die machine, battery laminating machine.