The Stable Function Of The Material Makes The Inflatable Shaft Overcome The Deformation In Use

Due to the long service life of the airbag itself, the damage rate of the airbag shaft is reduced, which also reduces the shutdown rate of the unit itself during the entire production process, which leads to the reduction of customers' bad products. Save customers' production costs. The service life of the inflatable shaft will affect the consumption cost of the user. Because the inflatable shaft is made of specially processed pipes, the material's stability function allows the inflatable shaft to overcome the common shortcomings such as deformation and twisting of the inflatable shaft in operation, ensuring that the production line unit can run stably under high-speed production conditions. Relying on the stable operation function, it brings customers the practice of high-end products. Easy to use: Compared with the usual high-quality layout steel, the weight of the inflatable shaft is very light, and then the strength of the operator and the inconvenience of operation are reduced. Taking the width of 1350mm as the standard, the component of the inflatable shaft itself usually used is about 24kg, and the product of chestnut is 14kg.

a. When installing the inflatable shaft, the first thing to make sure is that the compressor that controls the air pressure is in a stable state. Install a filter directly between the compressor and the inflatable shaft to prevent impurities from clogging the air pipe and causing air leakage. .

b. The direction of air entry should be vertical to prevent damage to the valve.

c. When exhausting, you must use the standard exhaust port. It is forbidden to use sharp hammers and other tools to avoid air leakage.

d. To install a pressure gauge and pressure control device, the air pressure must be controlled within the range of 3-8kg / cm.

e. When replacing the nozzle, a socket wrench must be used. If an internal failure occurs and a disassembly and repair is required, a professional maintenance person should not be disassembled to avoid unnecessary losses.

f. Be careful not to hurt the valve.

The nylon bristle is made into a single-piece brush cover. The single-piece brush cover is combined and pressed on the brush roller shaft. After the keys and the end plates at both ends are fixed, the outer circumference of the nylon bristles is integrally turned. It has the characteristics of simple structure, reasonable design, and long service life. It can increase the number of single-piece brush sleeves installed on the effective length of the brush roller shaft by about 10%, thereby filling the bristles with high density and improving the cleaning quality. After the overall brush rollers are assembled, the outer circle of the nylon brush rollers is overall polished and polished to improve the balance of the brush rollers and prolong the service life.

Spring brushes are suitable for glass machinery, textile printing and dyeing machinery, steel industry, automobile industry, pharmaceutical machinery, electronics industry, packaging machinery, printing machinery, home appliance industry, door and window industry, furniture industry, tobacco machinery, food machinery, beverages, fruits, vegetables, Environmental protection, environmental protection, and other industries' products cleaning, dust removal, polishing, sealing, water absorption and strip conveying at high temperature.