What Should I Pay Attention To When Operating The Slitter?

Slitting machines are now widely used in all walks of life. When we are operating the slitting machines, we will talk about the matters needing attention when actually operating the slitting machines. So in general, what details do we need to pay attention to when operating the slitter?

Today, everyone will talk about the matters needing attention when actually operating the slitter:

1. The slitting machine must divide and process the whole bundle or a whole piece of fixed length specifications, such as plastic bags, carton packaging, thick steel plates, tapes, leather products, wood, etc. to carry out the division production processing.

2. The most critical performance parameters of fixed-length slitting are slitting precision and the same length of the finished product.

3. The fixed-length slitting operation is divided into static and dynamic types: when the set length is reached, the machine will be stopped precisely, the static split will be processed, and the operation will be restarted after the slit; Dynamic slitting process during the whole process of raw material movement.

Slitting machine is a name for metal slitting equipment. Slitting machine is suitable for longitudinal cutting of metal strips, and rewinds the narrow strips after slitting into rolls. The slitting machine is easy to operate, with high cutting quality, high material utilization, and stepless speed regulation.

When we all operate the slitting machine, we need to pay more attention to these details when we operate the slitting machine. The correct way to operate and use the slitting machine is what we all need to do.

The use of slitting machines is completed by slitters and crosscutters. Therefore, high-quality slitters and crosscutters should be used. When we all use the slitting machine, what are the precautions for using it?

The precautions for using the slitting machine are as follows:
1. The speed of the host should be adjusted to the lowest speed before starting up.
2. The power of the slitting machine uses a three-phase four-wire system (AC380V) and is safely grounded to ensure the safety of the operator.
4． The place where the machine needs to be refueled should be maintained regularly.
5. The main shaft and the round knife use a stepless speed change system, which can be used for high and low speed adjustment and forward and reverse rotation control.
6. Equipped with a double-side sharpening system, using diamond grinding, the life of the grinding wheel can reach two years, and the blade does not need to be disassembled. The knife can be sharpened, and the blade remains sharp for a long time to achieve the best cutting quality.
7. Imported ball slide rails are used to advance the cutting width in parallel. With imported precision ball screws and slide rails, the cutting width and 0.1 mm are controlled to achieve high-precision cutting.
8. Imported ball slides are used for parallel advance cutting. Imported AC motor adjustment system is used for stepless adjustment to control the cutting speed translation and not easy to wear.

When we all use the slitting machine, we all need to pay more attention to these precautions. The correct way to operate and use the slitting machine is that we all need to pay more attention.