Talking About The Cloth Guide Device Of Cloth Guide Roller, What Should We Pay Attention To First?

The cloth guiding device of the cloth guide roller is firstly: during the cloth feeding process, when the cloth edge shifts left and right, the edge detecting cloth guiding device can make the first section of the guide track follow the cloth edge to move left and right to ensure that the fabric is properly needleed. The infrared edge detection automatic adjustment device used by this machine is composed of two infrared sensors (probes), one controller and two drivers.

The working principle is: when the cloth edge is at the position of the infrared probe or left or right, the infrared amplifier outputs the corresponding positive or negative signal, and the signal is processed by the controller to drive the motor of the driver, so that the output shaft of the driver rotates forward or reverse, and passes the gear The rack mechanism drives the guide rail to move left and right, so that the cloth edge returns to the middle position of the probe. This device has the advantages of strong anti-interference ability, almost no requirements for fabric color and thickness, high sensitivity, low energy consumption, and adjustment range width. Guide rail: Tenter guide rail is formed by folding 6mm steel plate. The groove contact with the chain is lined with abrasion-resistant steel plate. The guide rail is in contact with the needle bar with a special graphite strip. No lubricant is required during use. The life of the graphite lining strip is 7200. Over hours, can be replaced after wear.

Although the stainless steel cloth guide roller uses the characteristics of the material to successfully avoid the problem of rust, the processing manufacturers of stainless steel cloth guide rollers should see the overall trend of the current development of dyeing and finishing equipment technology, that is, environmental protection, energy saving, consumption reduction, Time-saving and efficient, short process development. In fact, the development direction of environmental protection, energy saving and time saving can be understood as saving resources as much as possible and using the smallest resource costs to obtain greater economic benefits, but at the same time not at the cost of destroying the natural environment.

The life of a rubber roller is not only related to the raw materials it uses in the manufacturing process, but also to the maintenance of daily life. If you do not pay attention to maintenance and maintenance, the best rubber roller will break down quickly. Things that could have been used for several years may be broken in one year. If you pay attention to daily maintenance and maintenance, use 2-3. Year is not a problem.

Of course, during the operation, you should also pay attention to the step-by-step operation according to the instructions. Always check the use of the rubber rollers. After the rubber rollers are used up, handle them gently, put them in a suitable location, and choose a good storage environment.