Describe The Applicable Scope Of The Correction Controller And Its Technical Parameters

First, the product is suitable for the industry

Guide control system is a multi-function correction control system. PRE has a very detailed research in the field of correction, and a lot of practical tests. The response from customers is quite good. For  controllers. We have made a multifunctional interface specifically for all coil industries. At present, the products have been widely used in light industry, textile, printing and dyeing, printing, rubber, textile, packaging steel belt and other industries.

Technical parameters and functional selling points

1. Utilizing the original fuzzy control theory originally developed in the United States to specifically control the fuzzy control technology, the controller can mimic the human eye to dynamically identify the coil material.

2. Compared with other brands, we have innovated the fuzzy recognition controller free balance adjustment function, which is simpler and more convenient to operate and the control is more reasonable.

3. The built-in position sensor of the actuator achieves the purpose of precise limit.

4. Automatic travel recognition system. Make the controller automatically recognize the mechanical limit or actuator limit: if the mechanical limit stroke is less than the actuator stroke, the controller takes the mechanical limit stroke as the electrical limit. vice versa.

5. Unique stall protection system. If the limit stroke does not match, and the machine is stuck, the actuator has reached the mechanical limit but not the electrical limit. If the actuator continues to move, this may damage the actuator or the deflection roller frame. If you encounter this problem, turn on the stall protection function, and the controller will match the current mechanical limit to protect the equipment.

6. The temperature inside the controller is generally below room temperature. No more than five degrees above room temperature. Guaranteed longer controller life.

7. The controller uses a 32-bit high-speed processing chip. The controller receives the sensor signals, and the response time from signal processing and calculation to issuing the control actuator command is less than 1 millisecond.

8. Sensor detection accuracy is less than 0.05 mm.

9. The controller has anti-reverse power protection to avoid damage to the controller due to misoperation.

10. The controller has a self-recovery power protection function. The power will be cut off automatically when over-current and over-voltage.

11. The actuator uses a servo motor, which is non-sparking, safe, reliable and has a long life.

12. Two types of actuators are suitable for various situations from small thrust to large thrust. 50 maximum thrust 1000N, allowable load 6000N. 200 maximum thrust 10000N, allowable load 60,000N. (Higher thrust can be equipped with EPC hydraulic station, just replace the actuator)

13. Within the actuator stroke range, set the limit stroke arbitrarily. The 50 stroke range is 1.0 "-2.0" (25mm--50mm). The 200 stroke range is 1.0 "-8.0" (25mm--200mm).

14. The actuator has no back-off error, which guarantees more ideal correction effect.