Aluminum Guide Rollers Also Need To Pay Attention To Some Maintenance

The aluminum guide roller is made of high-quality aluminum alloy material, and is made into various types of tubes through the mold. It has a reinforced rib structure and high strength. And using precision equipment and special tools for surface finishing, the surface is smooth, the coaxiality reaches 0.02mm, the whole axis is corrected within 2g by computer balance correction, the special technology of the shaft end and the imported bearings can be used under high speed operation. Easy to operate. The aluminum guide roller versatile with the damaged skin feather cloth roll guide roller and the guide missile cloth guide roller assembly cover the right end with a guide roller steam to form a hollow tube assumed to be in the cover assembly and the steam passage.

Deglazing maintenance of aluminum guide rolls: remove the glass layer on the surface of the rubber roller to maintain good surface roughness

De-calcium maintenance of aluminum guide rolls: In the printing process, the rubber roller is often hydrophilic, and the ink-retaining performance is degraded, which causes the ink on the ink roller and the water roller to be inked. The problem is easy to occur when printing the ground and the net. This is often caused by the calcification of the rubber roller. Calcium comes from paper and water during printing. It is constantly depositing calcium on the ink roller and water roller every day. Therefore, calcium removal is an indispensable part in printing. Maintenance procedures.

Cleaning and maintenance of aluminum guide roller color change: When printing dark color to light color and spot color printing color change, it often causes difficulty in cleaning, and the color conversion time is long, thereby reducing the efficiency of the printing machine and causing an increase in the reject rate; Incomplete cleaning will accumulate on the rubber surface and reduce the surface roughness of the rubber roller. Therefore, we emphasize that maintenance should be done from day to day, and every cleaning must be clean and thoroughly clean.

The idle maintenance of the aluminum guide roller: in order to prevent the influence of the temperature on the rubber roller, the good condition of the rubber of the idler seat is maintained, and the ink roller of the empty car needs special care and maintenance.

The aluminum guide is made of high-quality aluminum alloy. It has nine reinforcing ribs and a wall thickness of 5cm. The surface treatment is based on user requirements. It has ordinary oxidation, hard oxidation, Teflon, etc. to ensure its rigidity and wear resistance.