How Does The Flattening Roller Work?

Flattening rolls are commonly used in the packaging, printing, papermaking, printing, textile and other industries. Different industries have different cravings for flattening rolls. In order to meet the needs of different industries, Tianchuang metaphysical students supply a variety of flattening rolls. The semi-circular flattening roller, the aluminum alloy, the hand-rolled flattening roller, the rubber-type flattening roller and the like are swept. So, how does the strip-type flattening roller work? Let's take a look at the lower part.
 
First, the flattening roller structure integration
The flattening roller is not the same as the flesh, the aluminum alloy roller body, the mandrel, the inclined wheel, the oblique shield and the shaft seat.
 
Second, the flattening roller work
 
The surface of the roller of the flattening roller is evenly distributed with lateral grooves, the rubber strip is embedded in the aqueduct and the roller body is evolved by a roller surface which is arranged by the rubber strip, and the double sides of the rubber strip are respectively connected to the two sides of the roller body. On a wheel that is tilted outward. When the flattening roller body wraps, the strip will follow the roller body and rotate the tendon, and the skewer will gradually pull the strip toward the shaft end. In this process, the strip will turn from 0°. When it reaches 180°, it is gradually pulled to the maximum value and reaches the leveling effect. When the flattening roller body is turned from 180° to 360°, the rubber strip will be Dongshan again.


What are the reasons for the flattening roll glazing?
Everyone is not knowing that the flattening roller is widely used in printing, and the stencil is painted on the large surface of the flattening roller to prevent the flattening roller from turning over and the wind is peeling off the rain. That is to say, the root of the flattening roll glaze is a good guy?
 
What is the blue-and-white soap that is flattened by the flattening roll:
In the printing process, some of the leftover dirt accumulates on the rubberized face of the flattening roller, and the residual residue in the inside is enough to be cleaned with water or solvent, but there is still a microporous low point device in which a small amount of broken copper and iron remains on the rubber surface. bottom. These residues accumulate in the pores for a long time, and the pressure on the printing side and the thermal energy are down, eventually causing the flattening roller to lose microporosity and glaze.
 
It is worth mentioning that a pair of cleaning agents have poor cleaning power or excessive residue (such as local bad fire oil, gasoline, alcohol), and the city has accelerated the process of flattening the glaze. If not treated in time, the flattening roll glaze layer will become thicker and thicker, which will eventually cause great harm to printing.