Common Faults And Repair Instructions For Inflatable Shafts

The air expansion shaft is a special winding and unwinding shaft, which can protrude from the surface after high-pressure inflation, and the shaft that quickly retracts the surface part after deflation. As a high-precision transmission device, its operating state has a great influence on the stability of the entire mechanical system.
Therefore, corresponding maintenance work must be done for the leakage fault of the gas expanding core shaft:

1. Hose leakage: This phenomenon is that the quality of the hose itself is not good, and after installation, there will be air leakage after it has been inflated.

2. The sealing ring has a gap: install the sealing ring and drizzle a ring of sealant.

3. Air nozzle leakage: the inflator is not installed, just replace it with an inflator to install it.

4. Hose rupture: If this is the case, it is troublesome, and you need to remove the shaft head and install a new hose.

5. Loose pressing ring: This is relatively easy and only needs to tighten the pressing ring.

Contact Us