Folding Mask Machine Maintenance

It is very important that the mask equipment is purchased and maintained. The primary maintenance is in place. The equipment is also smooth during operation. The manufactured masks meet the standards. Doing this detail has a very large impact area. Check the common problems and solutions below the folding mask machine:

I. Appearance:
Masks are used on our faces, and some are even used in the operating room. Therefore, the production of masks requires the folding mask machine to be cleaned daily. At the end of each day, you can organize personnel to clean the work surface of the equipment and the plates that hold masks after the power is turned off. Be careful not to use water, oil, and other non-toxic and volatile cleaning liquids such as alcohol.

Second, the ultrasonic system: folding mask machine
Check whether the ultrasonic system is clean, especially the ultrasonic electric box, ultrasonic transducer, and welding head must be cleaned monotonously without water, and the connection line is healthy. Frequently check the wear of the ultrasonic welding head (mold). Folding mask machine pays attention to whether the voltmeter and ammeter pointers on the ultrasonic electric box are normal.

Folding mask machine

3. Transmission system:
The transmission system includes motors, gears, reducers, sprockets, chains, conveyor belts and other components. Folding mask machine maintenance needs to check whether the surface of the motor has dust and other things that affect heat dissipation. Are the gears and sprockets oiled or attached? . Is the chain tightness appropriate? Is there any foreign matter? Is the connecting screw of each transmission part loose? Is the reducer's lubricating oil sufficient? Usually, it needs to be replaced once every 1000 hours-1500 hours.

Fourth, the electrical system: folding mask machine
Check whether the circuit connector of the folding mask machine is loose. Is the main power cable, branch signal cable, etc. worn? Are they worn out? Folding mask machine

Five: Pneumatic system:
Is there any water in the air filter inspection? Check for air leaks in the air pipe? Is there any air leak in the air cylinder? Is the magnetic sensor's orientation and operation normal?

Others: The equipment must not come into contact with corrosive liquids and objects. For example: sweat can easily cause equipment parts to rust. If the equipment is not used for a long time, the transmission system and rust-prone parts of the folding mask machine must be coated with rust-proof oil.

Folding mask machine manufacturers perform maintenance on the mask production equipment according to the requirements. Not only can the number of repairs of the folding mask machine be reduced, but also the operating life of the folding mask machine can be provided, thereby providing the company's production power.