Maintenance And Maintenance Of Rewinder

Rewinding machine is generally used for: rewinding and slitting of mica tape, paper, and film. It plays an important role in slitting wide webs and further slitting again. , It is a special equipment for paper, mica tape and film.

Maintenance:

1. The transmission device of the toilet paper rewinder, such as the gear chain, needs to be buttered over a period of time.

2. Generally speaking, there will be no problems with the rewinder. The consumable parts are nothing more than small gears. If one is added, the printing knife is easy to break. The wool roller will become thinner after a year and a half of use, and needs to be transported back to the factory for repair. For the steel roller embossing device, if the embossing pattern needs to be replaced, the steel roller needs to be transported back to the original factory for modification, and it will not cost much.

3. Pay attention to the voltage of the rewinder to be stable, otherwise it is easy to burn the motor; pay attention to hygiene, do not let debris fall between the steel roller and the wool roller.


The prepreg tape slitting and rewinding machine includes: a frame; a traction roller assembly, the product traction roller assembly is rotatably arranged on the product frame; a first driving mechanism, the first driving mechanism of the product is arranged on the product frame The upper part drives the traction roller assembly of the product to rotate; the round knife assembly, the round knife assembly of the product is rotatably arranged on the frame of the product and is located downstream of the traction roller assembly of the product; the second drive mechanism, the second drive mechanism of the product It is arranged on the frame of the product to drive the round knife assembly of the product to rotate; wherein the rotation speed of the round knife assembly of the product is greater than the rotation speed of the traction roller assembly of the product. The prepreg tape slitting rewinder has fast slitting speed, good slitting quality, free of burrs and wire drawing, easy operation, reduced labor, and reduced waste rate.


The slitting rewinder includes a left wall panel and a right wall panel. An upper roller, a lower roller, a cutting device and an unwinding roller are arranged between the left wall panel and the right wall panel of the product. There is also an unwinding roller above the upper roller of the product. The winding chuck is characterized in that there is a swing device between the left and right wall panels of the product, the product swing device is set above the upper roller of the product, and the product winding chuck is installed on the product swing device ; The product swing device includes a swing shaft, a limit device set at both ends of the swing shaft, and a motor set at one end of the swing shaft. The winding chuck of the product is installed on the swing shaft of the product through a swing arm. The two ends are respectively installed on the left and right wall panels of the product via the limiting device of the product, and the motor of the product is connected to the limiting device at one end of the swing shaft of the product via an oval wheel. The slitter rewinder improves the uniformity of rewinding and also improves the aesthetics of the product after rewinding.