The Stable Function Of The Material Makes The Inflatable Shaft Overcome The Deformation During Use

Due to the long service life of the airbag itself, the inflatable shaft reduces its damage rate, which also reduces the downtime rate of the unit itself during the entire production process, leading to the reduction of customer bad products. Save the customer's production costs. The service life of the inflatable shaft will affect the consumption cost of the user. Because the inflatable shaft is made of specially processed pipes, the stable function of the material enables the inflatable shaft to overcome the common shortcomings such as deformation and twists of the inflatable shaft in use, ensuring that the production line unit can operate stably under high-speed production conditions. The reliable and stable operation function brings customers the practice of achieving high-end products. Convenient use: Compared with the usual high-quality layout steel, the inflatable shaft has a very light weight, which reduces the physical strength of the production operator and inconvenient operation. Based on the width of 1350mm, the weight of the usually used inflatable shaft itself is about 24kg, while the product of Kuribayashi is 14kg.

a. When installing the inflatable shaft, the first thing to make sure is that the compressor controlling the air pressure is in a stable state. Install a filter directly between the compressor and the inflatable shaft to prevent impurities from clogging the air pipe and causing air leakage. .

b. The direction of air entry should be vertical to prevent damage to the valve.

c. When exhausting, you must use the standard matching exhaust port, and it is forbidden to use sharp hammers and other tools to avoid air leakage.

d. To install a pressure gauge and pressure control device, and the air pressure must be controlled within the range of 3-8kg/cm.

e. When replacing the gas nozzle, you must use a socket wrench. If there is an internal failure and need to be disassembled and repaired, please ask professional maintenance personnel. Do not disassemble it yourself to avoid unnecessary losses.

f. Handle with care to avoid hurting the air valve.

The nylon bristles are made into a single-piece brush cover. The single-piece brush cover is combined and pressed on the roller shaft of the brush roller. After being fixed by the key and the end plates at both ends, the outer circumference of the nylon bristles is integrally turned. With the characteristics of simple structure, reasonable design and long service life, it can increase the number of single brush sleeves installed on the effective length of the brush roller shaft by about 10%, and then can fill the bristles with high density and improve the cleaning quality. After the integral brush roller is assembled, the outer circle of the nylon brush roller is overall trimmed and polished to improve the balance of the brush roller and extend the service life.

Spring brushes are suitable for glass machinery, textile printing and dyeing machinery, steel industry, automobile industry, pharmaceutical machinery, electronics industry, packaging machinery, printing machinery, home appliance industry, doors and windows industry, furniture industry, tobacco machinery, food machinery, beverages, fruits, vegetables, Sanitation and environmental protection, cleaning, dust removal, polishing, sealing, water absorption and high temperature strip conveying of products in industries such as environmental protection and environmental protection.发送反馈历史记录