Products

The photoelectric guiding device is an automatic photoelectric guiding control system for controlling the positional deviation of materials such as coils and cardboard during the conveying process. The products have functions of automatic detection, automatic tracking and...

The automated cloth rectification device makes use of a photoelectric sensor to detect the brink position of the coil, and sends the measured position mistakes signal to the controller. after the manipulate unit judges the procedure, the drive motor is controlled to correct...

A system consisting of EPC (Edge Positoin Control) and CPC (Center Position Control) enables high-precision control. The system works as shown below. The steel strip position sensor detects the edge of the steel strip, and the detection result is sent to the microcontroller....

The basic action flow of the automatic paper servo guide system is: manual paper feed reaches the paper feed port → the paper detection guiding sensor detects the paper → closes the paper feed path (forms the reference plane behind the friction wheel set) → uses the guide...

The servo guiding system (automatic photoelectric guiding device) has an automatic processing process for high speed, high precision and high efficiency, and the control position of the horizontal position of the coil is getting higher and higher. Equipped with...

The EPC servo automatic photoelectric guide control system is composed of a guide controller, a guide driver, and a sensor. The position of the edge or line is detected by the photoelectric sensor to pick up the edge or line position deviation signal, and then the position...

Guide control system refers to the technical operation of the coil produced by the manufacturer during the spraying, printing, punching, laminating, slitting or other coil winding process, always keeping the sides of the coil neat and consistent. Because the edge of the coil...

PG series narrow-width guide machine is designed for medium and small-sized coils. It is compact and integrates host controller, servo motor driver and photoelectric or ultrasonic sensor. It is a complete guide system that can be easily loaded into production equipment. Small...

In the production process of printing, printing and dyeing, film, textile, packaging and other industries, thin materials are unwinded, transported and wound up on long high-speed production lines. Due to various mechanical reasons, the coils will be deflected, resulting in...

EPC-A10 Coil Guide System is the crystallization of PRE and another advanced technology, providing you with first-class. Guide performance, the system uses high-speed 32-bit CPU, no overshoot integral variable PI adjustment algorithm, DC servo motor drive, High precision of...

Our newly developed one-piece controller is used for precise deviation of narrow-width materials, especially suitable for label printing and packaging non-woven fabric industry. The integrated machine is compact in design, easy to install, saves equipment space, and...

Use The correction controller is the heart of the electronic correction system. The correcting controller can correct the various coils and combine them with appropriate sensors, actuators, and other correcting components to help the production line run efficiently and...