What Are The Daily Maintenance Of Photoelectric Guiding Machine?

Maintain "four requirements"

(1) Neat: tools, workpieces, and accessories are placed neatly; safety protection devices are complete; line piping is complete.

(2) Cleaning: clean inside and outside; all sliding surfaces and screws, gears, racks, etc. are free of oil and no bumps; no oil leakage, no water leakage, no air leakage, no leakage; cleaning of the garbage.

(3) Lubrication: Oil is changed on time, oil quality meets the requirements; oil pot, oil gun, oil cup, linoleum, oil line are clean and complete, the oil mark is bright, and the oil path is smooth.

(4) Safety: Implement the system of fixed and fixed shifts; familiarize with the maintenance structure of the photoelectric correcting machine and observe the operating procedures, reasonably use the photoelectric correcting machine to maintain, carefully maintain the tools, and prevent accidents.

The principle of daily photoelectric guiding system machine maintenance

The routine maintenance of equipment is the basic work of equipment maintenance, and must be institutionalized and standardized. For the regular maintenance of equipment, work quotas and material consumption quotas shall be established, and assessment shall be carried out according to the quota. The regular maintenance work of equipment shall be included in the assessment content of the workshop contract responsibility system. Regular inspection of equipment is a planned preventive inspection. In addition to the human senses, the inspection methods must also have certain inspection tools and instruments. The inspections are carried out according to regular inspection cards. Regular inspections are also called periodic inspections. The photoelectric guiding system machine equipment should also be checked for accuracy to determine the degree of accuracy of the actual accuracy of the equipment.

1. In order to ensure that the photoelectric guiding machine equipment is always in a good technical state, it can be put into operation at any time, reduce the downtime, and improve the integrity of the photoelectric guiding machine.

Utilization, reduce the wear of photoelectric correcting machine, prolong the service life of photoelectric correcting machine, reduce the operation and maintenance cost of photoelectric guiding machine, ensure the safety production, must strengthen the

Maintenance work of photoelectric guiding machine equipment

2. The maintenance of photoelectric guiding machine must implement the principle of “maintenance and repair, prevention first”, and do regular maintenance, mandatory, correct handling and maintenance.

The relationship with the repair, is not allowed to be used only, not repaired

3. Each team must do the maintenance work of various photoelectric guiding machines according to the maintenance rules and maintenance categories of photoelectric guiding machine, and must not delay without undue delay.

After the approval of the special work, the maintenance can be extended, but generally it should not exceed half of the specified maintenance interval.

4. Maintenance of photoelectric correcting machine to ensure quality, according to the specified items and requirements, item by item, no leakage or no protection. Maintenance items, maintenance quality and maintenance

The problems found should be well documented and reported to the department.

5. Maintenance personnel and maintenance department should do “three inspections and one handover (self-inspection, mutual inspection, full-time inspection and one-time joint)”

Experience to improve the quality of maintenance

6. The Asset Management Department regularly supervises and inspects the maintenance of the photoelectric correcting machines of each unit, checks the quality of maintenance regularly or irregularly, and conducts awards and fines.

Managed content

Equipment maintenance work can be divided into routine maintenance and regular maintenance according to time; according to maintenance methods, it can be divided into general maintenance, regional maintenance and key equipment maintenance. Maintenance work includes: on-site management and maintenance work such as inspection, inspection, adjustment, lubrication, demolition and repair.