What Are The Advantages Of Photoelectric Guide Controller?

The photoelectric guide controller is a controller that uses optical components as inspection components. It first converts a precisely measured transformation into a data signal transformation, and then relies on optical components to further convert the data signal into an electronic signal. So, what advantages does it have? Let ’s check it out with everyone!

1. Long inspection interval.

If the inspection interval of about 10m is kept in the beam-to-beam type, the photoelectric corrector can maintain another inspection method.
2. There are few restrictions on inspection blocks.

Because the light blocking and reflecting surface caused by the inspection block is the basic principle of inspection, unlike the proximity sensor, which restricts the inspection block to metal materials, it can carry out almost all of the blocks such as laminated glass, plastic, wood, and liquid test.
3. Short response speed.

Light itself is very fast, and the controller's power circuit is composed of electronic parts, so it does not include reflective office hours.
4. High pixels.

It can technically concentrate the projected light in a small spot according to the advanced design scheme, or maintain a high pixel according to the unique composition of the dense and dense diffraction grating. It can also carry out the inspection of fine objects and the inspection of high-precision parts.
5. Non-touch inspection can be maintained.

The inspection can be maintained without having to touch the inspection block reflectively, and thus it is not easy to cause damage to the inspection block and the controller. Therefore, the controller can be used for a long time.
6, can maintain hue discrimination.

The photoelectric guiding controller has a certain difference according to the total reflectance and digestibility produced by the inspection object block according to the light wavelength of the light source to be cast and the hue composition of the inspection object block. Using these characteristics, the hue of the inspection block can be inspected.
7. Facilitate adjustment.

In the type of projected visible light, the projected light is visible from both eyes, which is conducive to the adjustment of the part of the inspection block.