The Accuracy Of The Hydraulic Photoelectric Guide Controller Of The Photoelectric Guide Sensor Is Determined By Three Factors.

The accuracy of the photoelectric photoelectric guide controller (photoelectric screw guide controller) of the photoelectric guide sensor is determined by three factors: the deviation of the coiled material, the accuracy of the guiding system itself, and the installation accuracy of the photoelectric web guide. It is recommended to install the guide at the position closest to the key process, but if the end user installs what kind of machine between the photoelectric guide and the key process, or the accuracy or parallelism of the roller shaft is not good, it affects the accuracy of the guiding. We are beyond control.

The magnetic powder brake is a new type of transmission component that uses magnetic powder as a medium to form a magnetic powder chain to transmit torque under energization. The magnetic powder brake is mainly composed of an inner rotor, an outer rotor, an excitation coil and a magnetic powder. When the coil is not energized, the active rotor rotates. Due to the centrifugal force, the magnetic powder is clamped on the inner wall of the active rotor, and there is no contact between the magnetic powder and the driven rotor, and the active rotor idles.

After the DC power supply is turned on, an electromagnetic field is generated, and the magnetic powder of the working medium forms a magnetic powder chain under the action of the magnetic force line, and the inner rotor and the outer rotor are coupled to achieve the purpose of transmitting and braking torque.

The hydraulic photoelectric guide controller (photoelectric screw guide controller) is an AC photoelectric guide control system. The system is easy to operate and easy to install. The performance in terms of system response speed, anti-interference and correction accuracy has been significantly improved compared with previous products. The improved wiring method completely avoids the damage of the controller caused by the original wiring error.

The photoelectric photoelectric guide controller (photoelectric screw guide controller) of the photoelectric guide sensor is a high-precision differential and swing selective guide controller for tracking the edge or printed line of the working material; it is composed of large-scale industrial integrated circuits. It has the advantages of strong anti-interference ability, high reliability, long service life and so on.