What Should I Pay Attention To When Using The Photoelectric Guide?

Correction of hot metal detector manufacturers believe that the photoelectric guide should pay attention to maintenance in use? Photoelectric web guiding This machine can guide the deviation of various coil materials such as web film, metal foil, non-woven fabric and woven fabric. The photoelectric guide controller can select the heel and follow-up methods according to the different materials, and freely select single/double electric eye detection to meet the needs of various materials.

1. Each team must do all kinds of mechanical maintenance work according to the mechanical maintenance procedures and maintenance categories, without delay, and special circumstances need to be managed;
2, to ensure that mechanical equipment is often in a good state of technology, ready to put into operation, reduce downtime, improve mechanical integrity, utilization, reduce mechanical wear, extend mechanical life, reduce mechanical operation and maintenance costs to ensure safe production, must Strengthen the maintenance of mechanical equipment;

3, photoelectric guide maintenance must implement the "maintenance and stress, prevention-based" principle, to achieve regular maintenance, mandatory, correctly handle the relationship between use, maintenance and repair, not allowed to use only no maintenance, only repair.

The main parameters of the photoelectric guiding instrument: the dimensions of the photoelectric guide instrument: 230mm (deep) × 205mm (width) × 98mm (height). Input voltage of photoelectric web guide system instrument: 220V±10%, 50Hz. The tracking mark line width of the photoelectric correcting instrument: ≥ 2mm, there is no limit to the opposite side. The range of fluctuation of the tracked edge or mark line of the photoelectric guide: <±0.75 mm/Hz. The control accuracy of photoelectric guiding instrument: <±1mm. Actuator of photoelectric guiding instrument: AC synchronous motor. The ambient temperature of the photoelectric guiding: <40 °C.