How To Adjust The Non-woven Slitting Machine

The non-woven slitting machine includes a frame, a blade fixing rod, a conveying roller and a rewinding roller. A support block is provided on each side of the rear of the frame, and the two ends of the blade fixing rod are fixed to the middle of the two support blocks respectively. Connected to the insertion hole on the blade fixing rod, the two ends of the conveying roller are fixed to the upper part of the two supporting blocks, the two ends of the rewinding roller are fixed to the two sides of the front of the frame, and the motor is set on the side of the frame The roller is connected to the motor, the control cabinet is set on the side of the frame, and the control cabinet is connected to the motor through the data cable. The beneficial effect of this product is that the blade fixing rod is provided with a plurality of insertion holes for inserting the blade, and the blade is inserted into the insertion hole on the blade fixing rod, which can be inserted according to the size of the required non-woven fabric Blade to adjust the size of the non-woven fabric cut. The control cabinet is set on one side of the frame and on the same side of the motor. The control cabinet is connected to the motor through the data cable, and the cutting speed of the non-woven fabric slitter is adjusted through the control cabinet.

(1) Frame part

It is welded by thick steel plate to be firm and honest, with balanced angle.

(2) Receiving part

This machine is easy to cut and wrap.

(3) Unwinding part

Unwinding diameter can reach 600 ~ 700mm.

(4) Cutter part

The knife distance can be adjusted between 18mm-1600mm.

(5) Host part

Mainly uses 5 KW motor and adopts electronic speed regulation system.

(6) Guide roller part

The whole machine adopts chrome-plated steel pipes, each of which has undergone dynamic balancing treatment.