These Precautions For Operating The Slitting Machine Must Not Be Less

Slitting machine is a mechanical device that cuts wide-width paper, mica tape or film into multiple narrow-width materials. It is commonly used in papermaking machinery, wire and cable mica tape and printing and packaging machinery.

The slitting machine is a pre-press and post-press equipment that divides a large roll of paper, film, non-woven fabric, aluminum foil, mica tape and other thin materials into small rolls of different widths. It is commonly used in papermaking machinery and printing and packaging machinery. The machine is continuously controlled from single motor to dual motor and triple motor, which is more stable and efficient when the machine speed is faster.

There are two factors that determine the paper width of the slitter, one is the cutter and the other is the paper guide roller. As the name suggests, the cutter determines the width of the paper that can be cut, but this does not mean that the wide cutter must cut the width of the paper.

In fact, a slightly narrower knife can also cut wider paper, but this will leave a bit of paper head in the cutting process, which will affect the overall appearance. Therefore, if you need to cut wider paper or communicate with the supplier, it is recommended to replace the larger blade.

Pay attention to the following items when operating the slitting machine:

1. The slitting machine needs to cut the whole roll or the whole raw material with a fixed length, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc., and must use fixed-length slitting control .

2. Fixed-length slitting control is divided into static and dynamic slitting: when the set length is reached, it will stop accurately, and then the static slitting process will restart after the slitting; when the set length is reached, it will be issued without stopping. Slitting signal, the slitting machine dynamically slits during material movement.

3. The most important performance index of fixed-length slitting is slitting precision, and the consistency of finished product length is good.

The above is the industry sharing about slitting machine, I hope you can like it.