The Advantages Of Slitter Structure

The central part of the slitter is equipped with a main shaft for processing paper tubes. The front end of the main shaft is fixed on the base with a set of bearings, and a pulley is installed in the middle of the set of bearings; a compression cylinder and a support rod for the cylinder are installed near the base A set of support rod bearings are installed on the upper end to support the main shaft.

The main cutter shaft is installed at the upper end of the slitting machine, and a number of blades are arranged on it, and they are arranged according to a certain gap; the support frame of the main cutter shaft is also provided at the top of the slitting machine, and a support is installed in the middle of the support frame cylinder.

When there is a film on the slitter and the roll joint is changed, use the vacuum film connection table to start the film connection table to the working position, manually flatten the film on the first traction roller of the slitter and start the upper vacuum pump to suck the film, so that the film Flatly adsorbed on the film receiving table, paste double-sided tape and cut off the excess film under the tape, flatten the film on the unwinding rack and start the lower vacuum pump to make the film flat adsorption, remove the tape on the paper layer and smooth For mucous membranes, the joints should be neat and wrinkle-free, then turn off the upper and lower vacuum pumps, and open the membrane connection table to the inoperative position.


Which methods are more reliable for selecting the slitter? Take a look with everyone today.
The first is safety.

Second, the equipment of the slitter is different from other mechanical products. It is a four-level dangerous machine tool with the highest danger level. Safety is the primary problem in the purchase and use of the slitter. Therefore, when choosing a slitting machine, we must focus on its safety and reliability.

Second, the mechanical structure.

The earliest mechanical slitting machine uses spring pressure to press the paper, and the sliding paper structure is used to push the paper. The structure is relatively simple, and the commissioning and maintenance are also convenient, but the pressure of the paper is low, and the cutting precision is poor.

Therefore, when choosing a slitting machine, you should choose according to the actual situation of the product you want to process.

Third, the comparison of energy consumption.

In addition to the above comparison, the same type of slitting machine also needs to compare the power of the whole machine, because the size of the motor power is not just a problem of power consumption.

Due to the precision matching of the slitting machine in the manufacturing and assembly process, it is necessary to choose a motor with a larger power, which is actually a method that cannot be solved and cannot be solved during the mechanical processing and assembly process.