Inflatable Shaft, Method For Improving The Adjustment Speed Is Not Stable

Although the inflation shaft is called more, the working principle is the same. The air expansion shaft and the air expansion sleeve are extremely convenient and quick to use. It only needs to be self-contained, and the air pressure is controlled within the range of 6-8kg/cm2. For components (such as round paper tubes), as long as the air gun is inflated against the air nozzle on the inflatable shaft, against external components (such as a circular paper tube), you need to loosen the paper when unloading Press out the sliding outer part of the nozzle (such as a round paper tube) to remove it.

The addition of the control technology engineering in the mechanical rotation adjustment can promote the higher use effect of the sliding process in the combined configuration, so the principle of the mechanical matching process can increase the pressure increase effect, and can control the accessory technology. The balance of repair and fast rotation prevents the occurrence of oxidative fading or poor repair process.

1, automatic rotation function

The air-expansion shaft has passed the steel-assisted functional characteristics, which increases the firmness of the steel in the bearing strength or rotation, avoids the fading of the process under pressure, and satisfies the amount of repairing the steel in the accessory steel.

2, aluminum alloy processing

In the repairing process of different inflation shafts, the effect of adjusting the compression capacity of the professional steel can be increased, so that in the professional packaging metal processing, the deviation of the sliding process of the rotating technology can be prevented.

3, improve the amount of hardening of steel

In the process of cost-increasing the technology of the air-expansion shaft, the effect of adjusting the compression capacity and the stability of the inflation can be prevented, and the effect of adjusting the slipping principle of the qi or oxidized steel is improved.


What are the maintenance methods for the inflation shaft?
The maintenance of the inflation shaft is very simple, because the life of the airbag itself inside the inflation shaft is very long, so the probability of damage to the inflation shaft itself is very small. This not only reduces the downtime in the production process, but also greatly reduces the number of defective products, thereby not only reducing the production cost, but also increasing the service life of the inflation shaft. The inflation shaft is in need of maintenance to extend its service life.

Every time you use the inflation shaft, you should handle it gently and never throw it away, otherwise it will cause the inflatable shaft component to fall. Secondly, in the process of use, it must be combined with the air humidity. If the humidity is too high, the airbag inside the air shaft will be wet, which will cause the air shaft to be corroded.

Then, during use, if the nut of the inflation shaft is found to be loose, tighten it in the fastest time, otherwise some parts will fall through the airbag and cause delays.

Finally, after using the inflation shaft, the air inside the inflation shaft should be discharged to prevent the inflation shaft from being in the expanded state, reducing the loss of the inflation shaft, and then prolonging the service life of the inflation shaft. These are the most basic maintenance. If you don't use it often, it is recommended to do it once a month to ensure that it is used properly.