Use And Selection Of Slip Shaft

What should you pay attention to during the use of the slip axis?
1. The sliding shaft is operated by inflation to make the air-expansion shaft operate. The pneumatic pressure drives various raw materials of different thickness and width, and it is necessary to ensure that the air-slip type shaft can not leak or leak when operating.
2, the slip shaft is a precision part, in the use should pay attention to the accuracy of the installation is to keep the shaft clean, can not carry the chip, keep lubrication. Moreover, it must not be worn during the disassembly process, and it should not be contaminated with dust.
3. If there is a leak, check the sealing ring, nozzle, pressure ring and hose immediately. Find the problem and deal with it immediately to avoid further damage. For example, the leakage caused by the sealing ring should be replaced immediately. Sealant.
The slip shaft belongs to precision instruments and is expensive. The requirements during use are generally more expensive. Paying attention to maintenance and reducing consumption is also a method to reduce production costs.

The slip shaft manufacturer tells you how to choose the slip axis
1. First, we must understand the types of slip shafts: center air pressure slip shaft, pneumatic side pressure slip shaft, mechanical side pressure slip ring, and air expansion shaft. First consider which one to choose from a wide range, and choose the one that suits you.
2. Contact the manufacturer on this product and conduct relevant consultations. The problem should be as fine as possible (production process, qualification rate, range of deviation, etc.), and be combined with your own needs to understand.
3. Select the slip axis according to the value of its own products. If it is a high-end product, then choose good quality. If the value of its own product is not high, don't pursue high quality. Choose cost-effective one. Slip. The shaft is a series of cost-effective products.

Ordering guide
1, can be customized according to size requirements;
2, the inflation and deflation time is as fast as 2 seconds to complete;
3, 1 to 1 free technical guidance selection service;
4. The type of inflation shaft needs to be specified;
5. Specify the external dimensions and nozzle position;
6. Mark the important dimensional tolerances on the shaft head
7, flexible expansion, expansion and contraction flexibility;
8, high-quality rubber liner and fast charge and exhaust nozzle;
9. Good sealing effect and long service life;
10. Issue official drawings and confirm the production of both parties;