The Key Factors To Be Considered In The Selection Of The Convex Key Type Shaft

Convex keying axis selection factor to be considered

To ensure the amount of air required in the range of the male-type inflatable shaft, the space of the male-type inflatable shaft requires complete ventilation, and in these areas to play its proper efficiency, we need to expand the convex type. The correct choice of the shaft, the convex-key type of inflation axis is the factor for what we choose to consider next.

The so-called correct choice mainly refers to the nature of the convex-key inflatable shaft is selected according to the transport gas; the convex-key inflatable shaft is selected to meet the required air volume system, and the system pressure to overcome the resistance, and at a higher Work efficiency is used in scope or economy.

The SWF series male-type inflatable shaft has the same resolution as the male-type air-inflating shaft fan, and has the same resolution as the convex-type air-expansion shaft high-pressure. It can be installed in the axial direction, and the piping system can consider leakage, some resistance The calculation is inaccurate, the reliable operation, the choice of pressure and airflow ventilation dust removal system should be greater than the manufacturer's pressure to calculate the air volume and wind pressure, the air volume convex key type inflation shaft convex key expansion shaft, in the convex The selected type of key-type inflatable shaft male-type air-inflated shaft product sample, the convex-key air-flat shaft determines the meter, speed and motor power. In order to facilitate the takeover and installation, a suitable position and male-type air shaft exit gearbox is also selected. The operating point of the male-type air-expansion shaft selection should be within the economic range and is on the right side of the high-efficiency point.

According to the actual use, and introduced the manufacturer's convex-key inflatable shaft, the convex-key inflatable shaft makes the correct choice to achieve the impact of demand.

The secret of the convex-key inflatable shaft to extend its service life

The male-inflated shaft is a high-quality mixed-flow male-type inflatable shaft, which has been gradually used. It relies mainly on the gas side of the machine's output to increase the gas pressure of the side quieter. It is a fluid. Drive the machine to block the convex-key type of air-inflating shaft to work directly on the entire machining process, then what should we do to extend the life of the convex-key inflatable shaft, today we will do the following for you:

We need to review the smooth system:

A daily newspaper cleans the oil filter.

b. A daily review of dust and moisture such as cream can be infiltrated, such as conversion, please change the butter.

C. The situation can be dripped, such as spring deformity, such as the drop can say that the daily review of the dirty can be removed, clean the screw mobilization.

d. The daily amount of oil can be viewed on the low line. If the tank below is more than butter, please refuel. (Butter specifies the ISO specification N68 lubricant, which can be appropriately increased in the local temperature cold butter grade).

Then we should review to ensure that the atmospheric filter, the filter we use, to ensure that the atmosphere is not dirty. Remove the dirty filter atmosphere, unscrew the screw butterfly mother to remove the lid, and clean the filter cleaning sponge.

We have to do more work than to extend the life of the convex-key inflatable shaft, so its performance is fully exploited, so for us, to improve work efficiency.