What Should You Pay Attention To When Operating The Magnetic Powder Clutch?

1. The magnetic powder clutch in normal operation, especially for new installations, should be noted that the surface temperature should not exceed 80 °C, the water-cooled brake should not exceed 90 °C, and the forced air cooling should not exceed 60 °C.
2. For water-cooled surface temperature, it should not be lower than 50 °C to avoid condensation. When the surface temperature is too low, the amount of water supplied should be appropriately reduced.
3, water, air cooling type in the operation process, and can not break water, wind, if you can not guarantee that the water supply, wind, water supply, wind protection device should be installed.
4. If circulating water cooling is used, it is recommended to add an anti-corrosion agent to the water and replace the water every other month.
5. The life of the magnetic powder clutch varies depending on the conditions of use. When the torque drops below 70% of the rated torque, it can be considered that the magnetic powder has deteriorated and should be replaced. However, it is sometimes difficult to determine the torque value at the work site. In this case, the method of appropriately increasing the excitation current can be used. When the current reaches the rated value and still cannot be used, replace the magnetic powder.