What Are The Common Faults And Main Performances Of The Air Shaft Accessories Used In Machine Tools?

Common faults and main performances of the air shaft accessories used in machine tools

Taking a lathe as an example, the types of common machine faults are:

(1) The automatic switch of the air shaft leakage can not be closed;

(2) Three motors cannot be started;

(3) The spindle motor cannot be started;

(4) Press the spindle motor start button SBl, the motor beeps and cannot be started;

(5) After the spindle motor starts, release the start button and the motor stops.

(6) The air shaft is pressed by the stop button, and the spindle motor M1 is not stopped.

Main performance of the inflation shaft:

1: The inflating operation time is short, the separation and placement of the inflation shaft and the paper tube can be completed in 3 seconds to complete the inflation and deflation, and it is not necessary to separate any parts on the shaft end side to be tightly engaged with the paper tube.

2: The paper tube is simply placed: in the action of inflation and deflation, the paper tube can be moved and fixed at any position on the shaft surface.

3: The bearing weight is large: the diameter of the shaft can be determined according to the actual needs of the customer, and the high-hardness steel is used to make the bearing weight increase.

4: High economic efficiency: The shaft is designed for special functions, and can be applied to all kinds of paper tubes of thick, thin, wide and narrow.

The inflation shaft manufacturer tells you the reason for the gas leakage
1. The hose is broken, there may be quality problems in the hose itself. It is necessary to remove the shaft head and replace it with a hose.

2. There is a gap in the sealing ring, which needs to be sealed in the sealant.

3. The pressure ring is loose, just tighten the pressure ring, pay attention to the usual observation of looseness.

4. The gas-filled mouth part leaks, and then it can be replaced and replaced.

Type of fault

Taking a lathe as an example, the types of common machine faults are:

(1) The automatic leakage switch cannot be closed;

(2) Three motors cannot be started;

(3) The spindle motor cannot be started;

(4) Press the spindle motor start button SBl, the motor beeps and cannot be started;

(5) After the spindle motor starts, release the start button and the motor stops.

(6) Press the stop button, the spindle motor M1 does not stop;

(7) The cooling pump motor M2 cannot be started;

(8) The fast-moving motor cannot be started;

(9) The light is not lit;

(10) The indicator light is off. and many more.