How To Operate The Slip Type Air Shaft To Achieve Energy Saving Effect

Note on the connection check of the slip type air shaft

The precautions for the component connection check of the slip type air shaft are as follows:

a. The output of all PLCs of the inflation shaft has a "short circuit" phenomenon, etc.

b. Is the machine power supply incoming line of the inflation shaft reliably grounded, and the specifications of the grounding wire meet the requirements.

c. Is the power cable and signal cable arranged properly, and the cable connection is correct and reliable.

d. Is there any damage to the connecting wires between the electrical cabinet and the equipment of the slip-type air-expansion shaft? Is there any crack or damage in the corner of the cable?

e. Is the grounding of the signal shielding line correct, the wiring on the terminal board is firm and reliable, and the system grounding wire is connected reliably.

The difference between slip type air shaft and ordinary air shaft

What is the inflation shaft?

It is a special type of winding and unwinding, that is, the axis on which the surface (referring to the key strip) can protrude after high pressure inflation, and the axis on which the surface part (referring to the key strip) is quickly retracted after deflation is called the inflation shaft. Its name is diversified, also known as pneumatic shaft, expansion shaft, inflation shaft, air expansion roller, inflation shaft, pressure shaft, air expansion roller and so on.

Principle of inflation shaft

Although the sliding type air shaft is called more, the working principle is the same. The air shaft and air expansion sleeve are extremely convenient and quick to use. It only needs to be self-contained, and the air pressure is controlled within the range of 6-8kg/cm2. When the outer part (such as a round paper tube) is tight, as long as the air gun is inflated against the air nozzle on the inflatable shaft, the key bar will protrude against the external part (such as a round paper tube) and need to be relaxed. When the paper is unloaded, press the sliding air core on the air nozzle to deflate, the key strip will return to the original appearance, and the external parts (such as the round paper tube) can be taken out to produce the inflatable shaft. Shafts!

The difference between the slip axis and the ordinary air shaft

Ordinary air-expansion shaft has a long swelled shaft and no section, so there is no slip function. When there are multiple strips, there is no corresponding slip motion due to the change of material tension. When the tension changes or the material thickness When uneven, it is easy to cause uneven winding, broken strips, loose rolls, and unwinding, resulting in material loss. The winding speed is low, and the work efficiency is poor. The same axis cannot receive the large and small volumes at the same time.

Before the air shaft is repaired, it is necessary to know how it works:

Standard air shaft working principle:

It is a special type of reeling, reeling, that is, the axis that can be inflated after high pressure inflation, and the shaft whose part of the surface is quickly retracted after deflation is called the inflation shaft. Only the user-supplied air source is required, and the air pressure is controlled within the range of 6-8 kg. When the reel core needs to be locked, as long as the inflatable handle is inflated against the air nozzle on the inflation shaft, the reel core unloading needs to be relaxed. When squeezing, press the sliding air core on the air nozzle to deflate. The air shaft can be applied to all machines and equipment for winding and unwinding.

How to operate the slip type air shaft to achieve energy saving effect

Modern society has become more and more urgent about resources. Many resources have been unable to be exploited and used by us. Therefore, how to save energy and contribute some resources to the earth has become a problem that everyone should pay attention to. The use of the machinery industry is very extensive, so how to use the slip-type air expansion shaft to achieve energy-saving effect?

1. The combination of slip type air expansion shaft and long strip expansion tile, the air expansion shaft generally has the function of inflation, and the pressure of the function has a certain degree of adjustment on the torqueability of the expansion tile, because There is no slippage in the structural expansion tile, so there is no slippage, so resources can be saved;

2. In the production process of the slip type air shaft, if the speed of the winding line is slowed down, corresponding measures can be taken to keep the original speed of the air expansion shaft, such as the working mode of adjusting the air pressure stop. Otherwise, it will seriously affect the working efficiency of the inflation shaft and waste resources.

The above knowledge hopes to help everyone and create greater benefits for you.