Winding Of Military Inflatable Shafts Is Unconstrained

Natural fragmentation operation and controlled fragmentation operation have been in use for some time. "Mechanical System Technology" discusses the expertise to improve metallurgical processes to optimize the fragment size and speed of a particular energetic material. Key developments in this area involve sightable ammunition (using a directional inflatable shaft) and the shape of a pre-assembled fragment (using special materials) to increase operating power.

Inflatable shafts are a type of machinery that uses the rewinding of sprayed fuel (using air as an oxidant) to achieve combat effectiveness. The phenomenon is similar to that caused by the deflagration of suspended dust or the winding of natural gas in a grain warehouse. But unlike this type of rewinding, the rewinding of military inflatable shafts is unconstrained. Therefore, its winding depends to a large extent on the density of the sprayed fuel and the precise, multi-point detonation of the oil and gas cloud.

In the revolving oil and gas cloud, the inflatable shaft is extremely powerful-its operating force is so great that it violates the relevant provisions of the Geneva Conventions. The inflatable shaft is also a very effective defoliant and has been used to detonate mines and clear minefields.

In summary, although tapered charge and reel-shaped inflatable shafts are mainly used for military purposes, important related phenomena, namely high-energy speed deformation of materials and high-temperature synthesis / processing have aroused some interest in the business community. However, this is still a growing field and has not been widely commercialized.

The more common accidents are mainly leaks. Once leaked, the machine may run abnormally.

There are five possible leaks in the inflatable shaft:

1. Hose leak. This phenomenon is that the quality of the hose itself is not enough. After it is installed, there will be a leak.

2. There is a gap in the seal ring. Install the seal ring and put a circle of sealant on it.

3. The air nozzle is leaking, the inflatable nozzle is not installed properly, just replace it with another inflatable nozzle and install it.

3. The hose is broken. If this is the case, it will be troublesome. You need to remove the shaft head and replace it with a new hose.

5. The pressure ring is loose. The dehumidifier is relatively easy, just tighten the pressure ring.