Coating Machine Produces Non-dry Coating Glue

 1. First tear off the self-adhesive decoration attached to the surface of the glass or the product, soak the towel with warm water (hot water in winter), wipe it twice at the trace of the self-adhesive; then apply soap on the warm and wet towel. Repeatedly wipe the trace several times at the mark; finally wipe the soap with a clean warm and damp towel, and the trace of the sticker is removed.
 
2. Apply the toothpaste evenly on the surface of the adhesive. Hold it for a while, then wipe it with a soft rag. Sometimes there are more adhesives and more firm. Apply the toothpaste on the trace that has not been removed. Still, you can get rid of the headache of the self-adhesive. The principle is that the toothpaste contains glycerin, is a good solvent, can dissolve the ingredients of the adhesive, and many other cosmetics also contain glycerin, can also be used to remove dry On the glue.
 
3. There are: use a pen paper knife to scrape, suitable for hard bottom surfaces such as glass and floor tiles; rubbed with alcohol, suitable for glass, floor tiles, clothing, etc.; frozen, self-adhesive is hard after freezing, can be directly torn Drop, suitable for alcohol, scraping, etc.
 
4. I heard that the effect of wind oil can also be. If it is a sticker of self-adhesive, it can also be blown off with a hair dryer, but it is not suitable for plastic, and the superheated plastic will be deformed.
 
5. Use the air duct to blow hot. This effect is very good. It is convenient for everyone at home to have a hairdryer for the air duct. No matter the sticker glass, plastic, wood or metal, you can use the air cylinder to blow back and forth a few times. Tear off a small side, slowly tearing in the direction of tearing and blowing with a wind tube, the effect is very good.

       6. The method of removing the adhesive is to first remove the self-adhesive surface material with a blade or an ink shovel, remove the residual glue with gasoline or acetone, and use a cloth with gasoline or acetone to wipe off the residual glue. Gasoline and acetone are good organic solvents, which can dissolve self-adhesive glue. The main component of self-adhesive glue is acrylic latex.
 
7. Gasoline and acetone are all flammable and volatile, pay attention to fire prevention. Pay attention to the concentration during use to avoid fire.