How To Properly Maintain The Anilox Roller?

The anilox roller is immersed in a tank of an ultrasonic cleaning system filled with a chemical cleaning solution, and the frequency conversion device in the tank transmits high-frequency sound waves to crush the dried ink in the cells and flow away with the cleaning liquid. Care must be taken when using ultrasonic cleaning: Excessive cleaning time can cause damage to the cells. The higher the number of lines, the shorter the cleaning time.

It is used in the printing machine of carton manufacturers. The surface of the roller is engraved into a pyramid-shaped net, and the surface is plated with hard chrome. It has the functions of high precision, high hardness, long service life, ensuring uniform and stable printing ink, and is ideal for printing equipment. Roller. Various anilox rolls in the range of mm500mmX3000mm can be processed according to user needs.

Matching of mixed glue and anilox roller: In order to make the offset on the paper suitable and the network cable clear, different meshing rollers must be taken into consideration for different sizing amounts. This is often negligent. Generally, the following working principles can be followed. The larger the amount of glue, the less the wire of the wire roller used; the smaller the amount of glue, the more the wire of the wire roller used. General manufacturers can prepare three sets of wire roller.

Anilox is a relatively fragile thing, and it is easy to get rid of some problems, but we can avoid these problems.

Usually the edge of the anilox roll is made at a right angle of 90 degrees, and the sharp and sharp edges are extremely susceptible to scratching the edge ceramics, thereby causing the ceramics to have a bad weight. The reason for the bruise is that the ceramic has a certain weight. It is easy to hit the edge when disassembling. In addition, when loading and unloading bearings and gears, accidentally scratching the edges of the ceramic.

Taking the anilox roller as an example, some end of life is a normal condition. After all, as the number of times and time of use increase, the aging problem will gradually appear until it is no longer used normally. There may also be some abnormal aging, that is, its aging problem does not increase with time, but due to some external forces, human factors, etc. caused its aging.

The structure and type of the anilox roller are mainly composed of two parts: the cell and the mesh wall. From the perspective of the composition, the roller core, the base material and the surface coating are mainly composed. The commonly used material for the base material is electroplated copper, which is the basis for making the mesh wall; the surface plating is made of metal chrome or ceramic, which mainly improves the wear resistance and the corrosion of the solvent to the base copper layer.